PATCH: NLTS + Valet + KnockCEL
Jan 5, 2008, 11:49 PM
#961
ok, so then 100 means MAP and then anything above that is turbo (boosting)
anything before 100 mean vaccum NA / spool ?
if so then the higher the gear I am in the higher the load cells I will hit because of the speed and I am traveling at and thus more air enters?
what happens in a dyno then?
anything before 100 mean vaccum NA / spool ?
if so then the higher the gear I am in the higher the load cells I will hit because of the speed and I am traveling at and thus more air enters?
what happens in a dyno then?
The Evo air intake doesn't have much of a ram air effect, so speed wouldn't play a role in that way. Higher gears do tend to produce higher loads at WOT though just because the turbo can build more boost.
Jan 9, 2008, 11:17 PM
#962
help would be much appreciated -- i cant drive like this....
stock IX maps and everything -- only thing added was this patch.
only started happening right after i installed this patch. basically ill be driving, 3-4k rpm, then say i want to hit boost and accelerate. it will start too, and then the car will jolt -- almost like I slammed on the brake.
also, slamming through gears (I was trying to figure out how/when I got this problem) going through the gears very quickly, shifting in the high 6k range, everytime i depress the clutch my car would jolt the same way, like someone was pressing the brake. and then 2-3 seconds later i would have control of the accelerator again.
did i do something wrong?
stock IX maps and everything -- only thing added was this patch.
only started happening right after i installed this patch. basically ill be driving, 3-4k rpm, then say i want to hit boost and accelerate. it will start too, and then the car will jolt -- almost like I slammed on the brake.
also, slamming through gears (I was trying to figure out how/when I got this problem) going through the gears very quickly, shifting in the high 6k range, everytime i depress the clutch my car would jolt the same way, like someone was pressing the brake. and then 2-3 seconds later i would have control of the accelerator again.
did i do something wrong?
Jan 9, 2008, 11:26 PM
#964
all i did was apply the patch to my rom (88590015) and i should have tested it but didnt. . . .
currently settings sit at:
NLTS RPM DROP 1500 units
NLTS TPS Threshold 70%
NLTS Speed Threshold 30km/h
i do appreciate the quick response -- makes want to scrounge for some money even more now to donate.
currently settings sit at:
NLTS RPM DROP 1500 units
NLTS TPS Threshold 70%
NLTS Speed Threshold 30km/h
i do appreciate the quick response -- makes want to scrounge for some money even more now to donate.
Jan 9, 2008, 11:30 PM
#965
ok try setting your TPS threshold to 98%...
chances are you are slightly resting your foot on the clutch... 70% is pretty low can quite easily hit that if you have a lead foot!
88590015 is pretty well tested so i would be suprised if there was a bug in it
chances are you are slightly resting your foot on the clutch... 70% is pretty low can quite easily hit that if you have a lead foot!
88590015 is pretty well tested so i would be suprised if there was a bug in it
Jan 9, 2008, 11:40 PM
#966
i appreciate the prompt help! was hoping someone would help me....but wasnt expecting you :-Pthanks again ill repost with an update!
Jan 10, 2008, 08:49 AM
#971
Evolving Member
iTrader: (3)
Join Date: Jul 2006
Location: Cedar Rapids, IA
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Silly question:
Let's say I set the time for the valet mode to 2 seconds then start the car and floor it for 2 seconds. The valet mode won't kick on while the car is running will it?
Let's say I set the time for the valet mode to 2 seconds then start the car and floor it for 2 seconds. The valet mode won't kick on while the car is running will it?
Jan 10, 2008, 10:01 AM
#973
Evolving Member
iTrader: (7)
Join Date: Sep 2006
Location: Northern VA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
)
Jan 10, 2008, 10:08 AM
#974
Evolved Member
iTrader: (9)
Join Date: Sep 2006
Location: SoFla
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
What, don't floor it for 2 seconds? Using NLTS you can floor it for 5, 6, maybe 10 seconds (depending how stock your car is )