Let's see your fully tuned timing maps
#2521
Evolving Member
I appreciate everyone taking a look at it.
Last edited by jeffbeagley; Apr 10, 2014 at 09:55 PM.
#2523
Evolving Member
#2524
I guess there will be some way to log peak load at any given rpm from evoscan!?? From that report I can then make the necessary changes for some low end torque!??
Last edited by mavraolan; Apr 10, 2014 at 01:22 AM.
#2526
#2529
Yesterday as you saw I fixed/smoothed my alternate hi/lo octane ignition maps. When I compared it with the previous one (that is before I smoothed the maps) I found out that
alternate base wastegate duty 1,2 also change. I didn't touch those maps. So every time I corrected wastegate maps, timing maps automatically were changed at some points. When I was fixing the timings maps back again, wastegate maps were change again. So I did timing maps as yesterday and I left wastegate maps changed on its own. Why? Does this ecuflash has the ability to correct/adjust between those two maps?
alternate base wastegate duty 1,2 also change. I didn't touch those maps. So every time I corrected wastegate maps, timing maps automatically were changed at some points. When I was fixing the timings maps back again, wastegate maps were change again. So I did timing maps as yesterday and I left wastegate maps changed on its own. Why? Does this ecuflash has the ability to correct/adjust between those two maps?
#2531
I tried other 88570008.xml files but is the same. Boost changes as I change the timings maps. Basicaly Lo octane ign timing map is changing.
I have attached the file that I am using. If you could try it would be great! Or if you have a different file that you could send me I would appreciate it!
Thank you
I have attached the file that I am using. If you could try it would be great! Or if you have a different file that you could send me I would appreciate it!
Thank you
#2533
Evolving Member
I don't have any experience besides 9417/9653 but I'd suggest removing everything out of your rommetadata folder, starting over with a fresh ROM AND a new xml. Copy all your old tables over and see if it continues doing it.
To prevent clutter on this thread, I'd recommend starting a new one and we can all help you out there!
To prevent clutter on this thread, I'd recommend starting a new one and we can all help you out there!
Last edited by jeffbeagley; Apr 11, 2014 at 10:40 AM.
#2534
I don't have any experience besides 9417/9653 but I'd suggest removing everything out of your rommetadata folder, starting over with a fresh ROM AND a new xml. Copy all your old tables over and see if it continues doing it.
To prevent clutter on this thread, I'd recommend starting a new one and we can all help you out there!
To prevent clutter on this thread, I'd recommend starting a new one and we can all help you out there!
#2535
My new timings
How does this look like? I will try it next weekend so any suggestions are welcome. I will use this combining with JDM RS MIVEC map.
how do u guys post the larger pictures from ecuflash?
how do u guys post the larger pictures from ecuflash?
Last edited by mavraolan; Apr 27, 2014 at 01:50 AM.