Meth Failsafe and Patches
#436
Evolved Member
iTrader: (6)
Join Date: Sep 2003
Location: Knoxville Tennessee
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
has anyone used the Perrin alky kit before? does it have good failsafes??? I have one but am deciding to sell it because I decided not to do meth injection...It has a flow sensor and is a progressive pump.
#437
Evolved Member
iTrader: (17)
Well, I will be ordering the EVO IX pins on Monday morning people. Everyone should thank laramie_05MR for making a very generous donation to the cause so all EVO IX owners will be able to benefit from this new patch! It was a very generous gesture to support our community! They say it will take 12 weeks to ship so if any EVO IX owners want a pre-made harness from me, they can use the EVO VIII harness now and simply zip tie the EVO VIII pin in place and I can send you the EVO IX pin in the mail when they arrive (or send the harness back and I'll install the new pin for you if you don't feel capable). My tutorial will be updated tomorrow with a link to order a harness and a full DIY section for those who wish to make their own.
Once I receive the pins, if you need some for your own harness I can sell them for $0.25 each.
Once I receive the pins, if you need some for your own harness I can sell them for $0.25 each.
#438
Evolved Member
iTrader: (17)
DIY ALT MAP harness tutorial is now updated with donation links for Tephra's patches and purchasing links for the ALT MAP harness' offered by me if you don't want to make your own. Cost is $18.99 plus 3 choices of shipping for anyone interested.
http://www.dsm-ezine.com/evoVIII_adc_switch.html
CLICK HERE!
http://www.dsm-ezine.com/evoVIII_adc_switch.html
CLICK HERE!
Last edited by Jack_of_Trades; Feb 1, 2008 at 08:04 PM.
#441
Evolved Member
iTrader: (17)
It slowed down the page a lot,lol. The band is Carbon Based Life Forms and the song name is "MOS6581".
You can't use version 4.2 yet, I used that link as a sample last night, forgot to remove the active link. I gotta see if Tephra can make a new thread for the newest version so I can create the link, even if the patch isn't fully ready just yet.
You can't use version 4.2 yet, I used that link as a sample last night, forgot to remove the active link. I gotta see if Tephra can make a new thread for the newest version so I can create the link, even if the patch isn't fully ready just yet.
Last edited by Jack_of_Trades; Feb 2, 2008 at 11:21 AM.
#443
yeah I will make a new thread for v4.7. I was kinda waiting for the 88590015 guys to say they were happy with the ADC switching, and then I would start doing other ROMID's.
Jamie if you are 100% happy with v4.7, ie you can see any improvments then I will make a new thread and post up some of the ROMID's this week..
actually come to think of it - it will be v4.8 which includes MrFred's rearo2 simulator...
Jamie if you are 100% happy with v4.7, ie you can see any improvments then I will make a new thread and post up some of the ROMID's this week..
actually come to think of it - it will be v4.8 which includes MrFred's rearo2 simulator...
#444
Evolved Member
iTrader: (17)
yeah I will make a new thread for v4.7. I was kinda waiting for the 88590015 guys to say they were happy with the ADC switching, and then I would start doing other ROMID's.
Jamie if you are 100% happy with v4.7, ie you can see any improvments then I will make a new thread and post up some of the ROMID's this week..
actually come to think of it - it will be v4.8 which includes MrFred's rearo2 simulator...
Jamie if you are 100% happy with v4.7, ie you can see any improvments then I will make a new thread and post up some of the ROMID's this week..
actually come to think of it - it will be v4.8 which includes MrFred's rearo2 simulator...
ALSO, anything you or anyone else can see wrong or missing with the tutorial??? I am just waiting for confirmation on the +12V ignition pin on the ECU harness before I post up the diagram for the EVO IX's. Hopefully I can have some updated diagrams tonight and video's or at least the pics that MrFred posted for the time being.
Last edited by Jack_of_Trades; Feb 2, 2008 at 05:55 PM.
#446
awesome stuff Jamie, those vids are pretty good
anyways i'm just testing v4.8 at the moment, I suspect it will be the final before I start work on v5 (boost switching, I ordered a MAP+3port BCS yesterday)
So this week sometime I'll create the new thread and start doing ROMID's
anyways i'm just testing v4.8 at the moment, I suspect it will be the final before I start work on v5 (boost switching, I ordered a MAP+3port BCS yesterday)
So this week sometime I'll create the new thread and start doing ROMID's
#447
Evolved Member
iTrader: (17)
Thanks, they were a pain to make lol. Can't wait til this new version is loaded with all of its goodies.
I forgot to ask if you could create a timed parameter so once it switches maps, it wont switch back until after a a set duration time? That way if something is on the fritz it can't flip back and forth between maps every few milliseconds. Possible? Just want to think of all situations.
I forgot to ask if you could create a timed parameter so once it switches maps, it wont switch back until after a a set duration time? That way if something is on the fritz it can't flip back and forth between maps every few milliseconds. Possible? Just want to think of all situations.
Last edited by Jack_of_Trades; Feb 3, 2008 at 09:21 AM.
#449
Evolving Member
iTrader: (11)
Join Date: Jun 2005
Location: Menomonee Falls, WI
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
tephra, are you planning on putting injector scaling maps in your next revision that switches boost? This would help provide at least an alternate map for e85 prior to the whole implementation of interpolation.