really hygh knock on really low load
#1
Newbie
Thread Starter
Join Date: Feb 2007
Location: mexico
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
really hygh knock on really low load
i have been loging all weekend and i have one isue. after long fun drive i was idling in 6 gear by 3000 rpm and se that whenever i toched the gas i have the knock cel so i log these and find out that i am having knock on loads under 100 and i even get a 35 count on 150 load just by pushing the accel.
Help on these
Mods are test pipe and injen intake, the only modified map (yet) is the mivec
Help on these
Mods are test pipe and injen intake, the only modified map (yet) is the mivec
Trending Topics
#12
Newbie
Thread Starter
Join Date: Feb 2007
Location: mexico
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
here there are two logs same day just one is a normal log in forth gear from 2000 till 7000 just one count two times full throtle the other litle load knock like kraysy
#15
Evolving Member
iTrader: (5)
Join Date: May 2005
Location: Chester Springs, PA
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Your timing is all over the place in partical throatle... Hence, high knock sum... My advise to you is to lower the timing and try it again..... Also, keep in mind that you will have to smoothe out the transition between WOT to Partial throatle especially for the timing...
By the way, you will have to make your boost to be more consistant. This will also help you out smoothing out the timing curve.... I am not sure if it was 2 byte load or not but you are boosting not much and boost is inconsistant...
By the way, you will have to make your boost to be more consistant. This will also help you out smoothing out the timing curve.... I am not sure if it was 2 byte load or not but you are boosting not much and boost is inconsistant...