Problem writing/comparing/Test writing
#1
Problem writing/comparing/Test writing
Hello
for my EVO IX I'm using the Version 1.34.1435 of ECUFlash.
I can read out my maps seamless and I can log all the signals with Evoscan and all other programs.
The problem occurs when I try to compare the current rom with the new one, or I make a test write. I didn't tried to write, since I don't want to make a mess.
The Message log is following:
sending init sequence 1 (0001)
got 0x05 response
sending init sequence 2
got 0x1B response
sending init sequence 3
entering bootloader
sending kernel size (4452)
sending kernel load address (0xFFFF7000)
uploading kernel
verifying kernel checksum response
kernel valid
kernel get version
rkrv: preamble 1 error
reading kernel comm buffer size
reading kernel flash buffer size
interface close
interface close
Can someone help me there?
Thanks
Pibus
for my EVO IX I'm using the Version 1.34.1435 of ECUFlash.
I can read out my maps seamless and I can log all the signals with Evoscan and all other programs.
The problem occurs when I try to compare the current rom with the new one, or I make a test write. I didn't tried to write, since I don't want to make a mess.
The Message log is following:
sending init sequence 1 (0001)
got 0x05 response
sending init sequence 2
got 0x1B response
sending init sequence 3
entering bootloader
sending kernel size (4452)
sending kernel load address (0xFFFF7000)
uploading kernel
verifying kernel checksum response
kernel valid
kernel get version
rkrv: preamble 1 error
reading kernel comm buffer size
reading kernel flash buffer size
interface close
interface close
Can someone help me there?
Thanks
Pibus
#3
Evolving Member
Join Date: Mar 2006
Location: Europe
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Help !
One additonal info:
By reading the messages
kernel get version
rkrv: preamble 1 error
do not give any error but something like
kernel get version
kernel version OpenECU ....
So it works.
By comparing and flashing there's always the same error.
Is there someone who can help?
Please let me understand what can be wrong. I need your help
By reading the messages
kernel get version
rkrv: preamble 1 error
do not give any error but something like
kernel get version
kernel version OpenECU ....
So it works.
By comparing and flashing there's always the same error.
Is there someone who can help?
Please let me understand what can be wrong. I need your help
![Help Me](https://www.evolutionm.net/forums/images/smilies/help.gif)
![Help Me](https://www.evolutionm.net/forums/images/smilies/help.gif)
Hello
for my EVO IX I'm using the Version 1.34.1435 of ECUFlash.
I can read out my maps seamless and I can log all the signals with Evoscan and all other programs.
The problem occurs when I try to compare the current rom with the new one, or I make a test write. I didn't tried to write, since I don't want to make a mess.
The Message log is following:
sending init sequence 1 (0001)
got 0x05 response
sending init sequence 2
got 0x1B response
sending init sequence 3
entering bootloader
sending kernel size (4452)
sending kernel load address (0xFFFF7000)
uploading kernel
verifying kernel checksum response
kernel valid
kernel get version
rkrv: preamble 1 error
reading kernel comm buffer size
reading kernel flash buffer size
interface close
interface close
Can someone help me there?
Thanks
Pibus
for my EVO IX I'm using the Version 1.34.1435 of ECUFlash.
I can read out my maps seamless and I can log all the signals with Evoscan and all other programs.
The problem occurs when I try to compare the current rom with the new one, or I make a test write. I didn't tried to write, since I don't want to make a mess.
The Message log is following:
sending init sequence 1 (0001)
got 0x05 response
sending init sequence 2
got 0x1B response
sending init sequence 3
entering bootloader
sending kernel size (4452)
sending kernel load address (0xFFFF7000)
uploading kernel
verifying kernel checksum response
kernel valid
kernel get version
rkrv: preamble 1 error
reading kernel comm buffer size
reading kernel flash buffer size
interface close
interface close
Can someone help me there?
Thanks
Pibus
Thread
Thread Starter
Forum
Replies
Last Post