need help: new xml files for upcoming ECUFlash release
#212
EvoM Community Team
iTrader: (15)
https://www.evolutionm.net/forums/6688770-post841.html
This may be pertinant. Not sure if Mr Freds defs were used in the most recent version of 1.41.
Also, wouldn't it be nice if the mods file could <exclude> a table from the other XML? EG: to get rid of the maps replaced by tephra's altmaps.
EDIT: Fixed, nevermind.
This may be pertinant. Not sure if Mr Freds defs were used in the most recent version of 1.41.
Also, wouldn't it be nice if the mods file could <exclude> a table from the other XML? EG: to get rid of the maps replaced by tephra's altmaps.
EDIT: Fixed, nevermind.
Last edited by fostytou; Feb 13, 2009 at 11:02 AM.
#213
EvoM Community Team
iTrader: (15)
Does anyone know if there is a flag or an option we can set to make the default status of all of the sections "collapsed" instead of expanded? It seems like every time I open ECUFlash I collapse all of the sections by hand and then expand only the ones I'm working with.
#214
There is a mismatch in evo9base: the MAFHz frexpr is wrong, here is the correct one:
Code:
<scaling name="MAFHz" units="Hz" toexpr="6.29*x/64" frexpr="64*x/6.29" format="%.0f" min="0" max="5000" inc="1" storagetype="int16" endian="big"/>
#215
Evolved Member
iTrader: (30)
Join Date: Oct 2006
Location: Fl/Jam
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Bringing back this thread...need a little help here
I just installed ecuflash v1.41 and followed the instructions to do the XXXXXXXX_mods.xml file. Pretty much the only patches I have are Tephra's V5.10, and JDM Map sensor patches...since the 1.41 already comes with the mut tables, lean spool tables and 2 byte stuff I just took them out.
I'm coming from 1.29a so I know I had to change the endian to big in the tephra mods. I'm pretty sure I did everything ok, but when I open my .hex in 1.41 only the tephra stuff from my _mods file show up properly, the map sensor stuff are grayed out. Yes I am in developer mode. Although they're grayed out I can still open the tables and view and change what's in there.
Any idea whats going on here?
I just installed ecuflash v1.41 and followed the instructions to do the XXXXXXXX_mods.xml file. Pretty much the only patches I have are Tephra's V5.10, and JDM Map sensor patches...since the 1.41 already comes with the mut tables, lean spool tables and 2 byte stuff I just took them out.
I'm coming from 1.29a so I know I had to change the endian to big in the tephra mods. I'm pretty sure I did everything ok, but when I open my .hex in 1.41 only the tephra stuff from my _mods file show up properly, the map sensor stuff are grayed out. Yes I am in developer mode. Although they're grayed out I can still open the tables and view and change what's in there.
Any idea whats going on here?
#219
Evolved Member
iTrader: (30)
Join Date: Oct 2006
Location: Fl/Jam
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Well just my luck, I happen to fall into that small batch of older cables that don't work. It says that it cannot connect with the interface. Is there some update that I need to do or once it isn't able to connect that's it?
#222
EvoM Community Team
iTrader: (15)
Code:
<scaling name="MAFHz" units="Hz" toexpr="6.29*x/64" frexpr="(64*x)/6.29" format="%.0f" min="0" max="5000" inc="1" storagetype="int16" endian="big"/>
Code:
<scaling name="InjectorLatency" units="ms" toexpr="x*0.024" frexpr="x/0.024" format="%.3f" min="0" max="4" inc="0.024" storagetype="uint8" endian="big"/>
Last edited by fostytou; Mar 25, 2009 at 09:17 AM.
#223
Evolving Member
iTrader: (2)
Join Date: Jan 2007
Location: Las Vegas
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
if it isn't to late to make a contribution i have a 9055 rom i can send you.... however. i tried it with the evo7base in the zip file on this thread and cant view half of my tables. so if you can give me a couple of days to get everything working again that would be great.
#224
Evolving Member
iTrader: (2)
Join Date: Jan 2007
Location: Las Vegas
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
looked at both evo7bases and all of your definitions are almost the same as mine just minor changes i made to mine to get them working. also i have a lot of tables in my 7base that you didnt have. i made a txt with the changes for you to look at i also included the tables that i use along with my 9055 xml. carfull i have just about all of the mods i can think of in my 9055, tephra and SD.
#225
Evolved Member
iTrader: (2)
mrfred, do you think it would be possible to get the MUT table definition in evo7base_*.xml changed to this one (with the "RamAddress" scaling)? The default version is almost unusable for some of us using small form-factor systems for flashing (tablets, netbooks, etc; the maximum resolution on my tablet is 800x600).
Code:
<scaling name="RamAddress" units="hex" toexpr="x-4294901760" frexpr="x+4294901760" format="%04X" min="0" max="65535" inc="1" storagetype="uint32" endian="big"/> <table name="MUT Table" category="Misc" type="3D" level="1" scaling="RamAddress"> <table name="X" type="Static X Axis" elements="16"> <data>0</data> <data>1</data> <data>2</data> <data>3</data> <data>4</data> <data>5</data> <data>6</data> <data>7</data> <data>8</data> <data>9</data> <data>A</data> <data>B</data> <data>C</data> <data>D</data> <data>E</data> <data>F</data> </table> <table name="Y" type="Static Y Axis" elements="16"> <data>MUT0X</data> <data>MUT1X</data> <data>MUT2X</data> <data>MUT3X</data> <data>MUT4X</data> <data>MUT5X</data> <data>MUT6X</data> <data>MUT7X</data> <data>MUT8X</data> <data>MUT9X</data> <data>MUTAX</data> <data>MUTBX</data> <data>MUTCX</data> <data>MUTDX</data> <data>MUTEX</data> <data>MUTFX</data> <data>MUT10X</data> <data>MUT11X</data> <data>MUT12X</data> <data>MUT13X</data> <data>MUT14X</data> <data>MUT15X</data> <data>MUT16X</data> <data>MUT17X</data> <data>MUT18X</data> <data>MUT19X</data> <data>MUT1AX</data> <data>MUT1BX</data> <data>MUT1CX</data> <data>MUT1DX</data> </table> </table>