Pin for ecu clutch position sensor
#1
Newbie
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: ny
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Pin for ecu clutch position sensor
hello I believe that PIN 43 is used for the clutch position sensor. I own a 3rd generation eclipse and run dual ecu's, one of which is a flashable evo8 ecu. Since I am automatic I am trying to simulate a clutch position sensor so I can use launch control with my high stall converter. the problem I have ran into is that I tried grounding that pin to see maybe if I could toggle a ground into it to activate my launch control and I received no success. Does anyone know what that reads? is it just a 12v power that is removed when clutch is activated or is 12v pushed into it when clutch is pressed. I was just scared to fry my ecu.
#2
Newbie
iTrader: (2)
Join Date: Oct 2007
Location: MIAMI,FLORIDA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
im wondering the samething as you.....i been searching here for hours and i figured out that in order for the launch control to work it needs the signal from the vehicle speed sensor!!!!.....so can we do this??
#7
Evolving Member
iTrader: (10)
and far as how the pin works? u got me cause i was doing something simular. i wasnt getting a reading 12 or ground clutch in or out on that pin.
the clucth saftey switch is wierd too....its a constant ground pedal out....it kills the ground to one side when pressed in. Its usually the other way around.
the clucth saftey switch is wierd too....its a constant ground pedal out....it kills the ground to one side when pressed in. Its usually the other way around.