Evoscan 2.3 released.
#62
EvoM Community Team
iTrader: (15)
If i understand correctly, since i just bought my cable (1.3u) I can not use any of the new features of the acd logging? (it doesnt have pin 1 or 9 or both?) plus i have that distracting "under 15mph" blink light issue. so I need an older cable to make use of new release features? I'm a bit confused about that part.
side note: does anyone else get random reconnects (where the lady tells you "logging engaged" and missing bits of data in the log stream?) Mine randomly seems to just a few seconds from time to time. of course its when i hope to have that part of the log to review...
thnx
side note: does anyone else get random reconnects (where the lady tells you "logging engaged" and missing bits of data in the log stream?) Mine randomly seems to just a few seconds from time to time. of course its when i hope to have that part of the log to review...
thnx
If you just bought a cable it and it makes that light blink it shouldn't be the tactrix cable. Look for the OBDII pinout I posted in another thread and make sure you don't have pins 1 or 9. Information on making things work properly should be in that thread also.
#63
Evolving Member
Join Date: May 2008
Location: Dallas, TX
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Thanks frosty! It seems that I have the later style cable with pin 1, but without pins 3 or 9. So I should be good to go. I am however still puzzled as to why Evoscan (2.1) seems to "reset" at times and when it does i lose about 10 seconds worth of logs. (seems to do it more at lower speeds).
Last edited by tnt1106; Jun 24, 2008 at 06:58 AM. Reason: speeling
#66
Evolving Member
Same problem here. I did pay for Ver 2.1 and I do have a serial number.
Definately not in my junkmail and nor in my deleted items.
I also tried logging a new support ticket, and when it prompts u to
"Please enter the number displayed above:"
it doesn't accept the number, even if you have entered it in correctly.
Where to now?
Definately not in my junkmail and nor in my deleted items.
I also tried logging a new support ticket, and when it prompts u to
"Please enter the number displayed above:"
it doesn't accept the number, even if you have entered it in correctly.
Where to now?
Now I have a different problem.
I could never get my IDC/fuel trims to log with ver 2.1, even after editing the dtat settings with the info posted here on the forums.
Now that I have ver 2.3 installed, I was expecting my fuel trims and IDC's to work straight away. they don't and I have no idea what the problem could be.
Any ideas what I could check....
Thx
Last edited by SeanV; Jun 26, 2008 at 04:42 AM.