patch for 88590015: control front and rear O2 with wideband
#1
patch for 88590015: control front and rear O2 with wideband
I started a new thread with an updated patch.
Closed loop cruise 88590015 patch instructions for non-tephra and tephra ROM
This is quick instructions for installing my "front O2 sim + rear O2 sim" patch for the 88590015 ROM. There are two main features in this patch. The first feature is the rear O2 sim routine. It is always operational, and this is the same routine that makes up my standalone "rear O2 sim" patch that tephra is using in his patched ROMs. The front O2 sim is the second feature of this new patch. It can be enabled and disabled, and has several features that allow custom tailoring the closed loop cruise AFR. With the patch, the closed loop fueling will follow whatever AFR values are inserted into the fuel tables. It also has a feature to set the closed loop AFR to whatever value you want while the engine is warming up. This second feature is nice because a richer AFR can be used during warmup to the help the car run better when its cold.
********** Start instructions for non-tephra ROM *************
1) Wire an analog out from your WBO2 controller into the ECU. Instructions are here.
Skip the "ROM Modifications" part of that how-to, but do everything else. In the last part of that how-to, there are instructions for calculating the scaling formula for EvoScan. The values from that formula will need to be used for the front/rear O2 sim patch. The example formula for EvoScan in that how-to is:
0.03137*x + 9.06
In that example, mL = 0.03137, and bL = 9.06. For this patch, you'll need 1/mL and bL/mL. For this example,
1/mL = 1/0.03137 = 31.9
bL/mL = 9.06/0.03137 = 289
2) Copy the following tables to your ECUFlash "88590015.xml" file:
------ (Don't copy the "-------")
<table name="Rear O2 (ADC 0A) RAM variable" category="Front/Rear_02" address="c2be" type="1D" level="1" scaling="Hex16"/>
<table name="MUT Port for Wideband (12)" category="Front/Rear_02" address="3eece" type="1D" level="1" scaling="Hex16"/>
<table name="Front Narrow Band Sim On/Off" category="Front/Rear_02" address="8734" type="1D" level="1" scaling="uint8"/>
<table name="Cold Engine Global Closed Loop AFR" category="Front/Rear_02" address="8736" type="1D" level="1" scaling="AFR16"/>
<table name="Min Coolant Temp To Use AFR Table" category="Front/Rear_02" address="8738" type="1D" level="1" scaling="Temp"/>
<table name="AFR Table Multiplier High Word" category="Front/Rear_02" address="8740" type="1D" level="1" scaling="Hex16"/>
<table name="AFR Table Multiplier Low Word" category="Front/Rear_02" address="8742" type="1D" level="1" scaling="Hex16"/>
<scaling name="mLinverse" units="1/mL" toexpr="x/8" frexpr="x*8" format="%.1f" min="0" max="100" inc="0.1" storagetype="uint16" endian="big"/>
<table name="LC-1 AFR Correlation 1/mL Value" category="Front/Rear_02" address="873A" type="1D" level="1" scaling="mLinverse"/>
<table name="LC-1 AFR Correlation bL/mL Value" category="Front/Rear_02" address="873C" type="1D" level="1" scaling="uint16"/>
<table name="Front/Rear 02 Sim Hook" category="Front/Rear_02" address="c250" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1" scaling="Hex16">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="10">
<data>C250</data>
<data>C252</data>
<data>C254</data>
<data>C256</data>
<data>C258</data>
<data>C25A</data>
<data>C25C</data>
<data>C25E</data>
<data>C260</data>
<data>C262</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 1 Hex" category="Front/Rear_02" address="4a000" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1" scaling="Hex16">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="40">
<data>4A000</data>
<data>4A002</data>
<data>4A004</data>
<data>4A006</data>
<data>4A008</data>
<data>4A00A</data>
<data>4A00C</data>
<data>4A00E</data>
<data>4A010</data>
<data>4A012</data>
<data>4A014</data>
<data>4A016</data>
<data>4A018</data>
<data>4A01A</data>
<data>4A01C</data>
<data>4A01E</data>
<data>4A020</data>
<data>4A022</data>
<data>4A024</data>
<data>4A026</data>
<data>4A028</data>
<data>4A02A</data>
<data>4A02C</data>
<data>4A02E</data>
<data>4A030</data>
<data>4A032</data>
<data>4A034</data>
<data>4A036</data>
<data>4A038</data>
<data>4A03A</data>
<data>4A03C</data>
<data>4A03E</data>
<data>4A040</data>
<data>4A042</data>
<data>4A044</data>
<data>4A046</data>
<data>4A048</data>
<data>4A04A</data>
<data>4A04C</data>
<data>4A04E</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 2 Hex" category="Front/Rear_02" address="4a050" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="40">
<data>4A050</data>
<data>4A052</data>
<data>4A054</data>
<data>4A056</data>
<data>4A058</data>
<data>4A05A</data>
<data>4A05C</data>
<data>4A05E</data>
<data>4A060</data>
<data>4A062</data>
<data>4A064</data>
<data>4A066</data>
<data>4A068</data>
<data>4A06A</data>
<data>4A06C</data>
<data>4A06E</data>
<data>4A070</data>
<data>4A072</data>
<data>4A074</data>
<data>4A076</data>
<data>4A078</data>
<data>4A07A</data>
<data>4A07C</data>
<data>4A07E</data>
<data>4A080</data>
<data>4A082</data>
<data>4A084</data>
<data>4A086</data>
<data>4A088</data>
<data>4A08A</data>
<data>4A08C</data>
<data>4A08E</data>
<data>4A090</data>
<data>4A092</data>
<data>4A094</data>
<data>4A096</data>
<data>4A098</data>
<data>4A09A</data>
<data>4A09C</data>
<data>4A09E</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 3 Hex" category="Front/Rear_02" address="4a0a0" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="12">
<data>4A0A0</data>
<data>4A0A2</data>
<data>4A0A4</data>
<data>4A0A6</data>
<data>4A0A8</data>
<data>4A0AA</data>
<data>4A0AC</data>
<data>4A0AE</data>
<data>4A0B0</data>
<data>4A0B2</data>
<data>4A0B4</data>
<data>4A0B6</data>
</table>
</table>
--------
3) Download the following ROM: 88590015_front-rear_O2_patched_v6.zip
4) Open the ROM in ECUFlash. Find the newly added entries in this patched ROM, and copy the values over to your ROM.
5) If your 1/mL and bL/mL values are different than mine, then insert your values into the corresponding tables.
6) Closed loop cruise is controlled by three different tables:
********** End instructions for non-tephra ROM *************
********** Start instructions for tephra ROM *************
1) Wire an analog out from your WBO2 controller into the ECU. Instructions are here.
Skip the "ROM Modifications" part of that how-to, but do everything else. In the last part of that how-to, there are instructions for calculating the scaling formula for EvoScan. The values from that formula will need to be used for the front/rear O2 sim patch. The example formula for EvoScan in that how-to is:
0.03137*x + 9.06
In that example, mL = 0.03137, and bL = 9.06. For this patch, you'll need 1/mL and bL/mL. For this example,
1/mL = 1/0.03137 = 31.9
bL/mL = 9.06/0.03137 = 289
2) Copy the following tables to your ECUFlash "88590015.xml" file:
------ (Don't copy the "-------")
<table name="Rear O2 (ADC 0A) RAM variable" category="Front/Rear_02" address="c2be" type="1D" level="1" scaling="Hex16"/>
<table name="MUT Port for Wideband (12)" category="Front/Rear_02" address="3eece" type="1D" level="1" scaling="Hex16"/>
<table name="Front Narrow Band Sim On/Off" category="Front/Rear_02" address="8734" type="1D" level="1" scaling="uint8"/>
<table name="Cold Engine Global Closed Loop AFR" category="Front/Rear_02" address="8736" type="1D" level="1" scaling="AFR16"/>
<table name="Min Coolant Temp To Use AFR Table" category="Front/Rear_02" address="8738" type="1D" level="1" scaling="Temp"/>
<table name="AFR Table Multiplier High Word" category="Front/Rear_02" address="8740" type="1D" level="1" scaling="Hex16"/>
<table name="AFR Table Multiplier Low Word" category="Front/Rear_02" address="8742" type="1D" level="1" scaling="Hex16"/>
<scaling name="mLinverse" units="1/mL" toexpr="x/8" frexpr="x*8" format="%.1f" min="0" max="100" inc="0.1" storagetype="uint16" endian="big"/>
<table name="LC-1 AFR Correlation 1/mL Value" category="Front/Rear_02" address="873A" type="1D" level="1" scaling="mLinverse"/>
<table name="LC-1 AFR Correlation bL/mL Value" category="Front/Rear_02" address="873C" type="1D" level="1" scaling="uint16"/>
<table name="Front/Rear 02 Sim Hook" category="Front/Rear_02" address="c250" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1" scaling="Hex16">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="10">
<data>C250</data>
<data>C252</data>
<data>C254</data>
<data>C256</data>
<data>C258</data>
<data>C25A</data>
<data>C25C</data>
<data>C25E</data>
<data>C260</data>
<data>C262</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 1 Hex" category="Front/Rear_02" address="47f00" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1" scaling="Hex16">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="40">
<data>47F00</data>
<data>47F02</data>
<data>47F04</data>
<data>47F06</data>
<data>47F08</data>
<data>47F0A</data>
<data>47F0C</data>
<data>47F0E</data>
<data>47F10</data>
<data>47F12</data>
<data>47F14</data>
<data>47F16</data>
<data>47F18</data>
<data>47F1A</data>
<data>47F1C</data>
<data>47F1E</data>
<data>47F20</data>
<data>47F22</data>
<data>47F24</data>
<data>47F26</data>
<data>47F28</data>
<data>47F2A</data>
<data>47F2C</data>
<data>47F2E</data>
<data>47F30</data>
<data>47F32</data>
<data>47F34</data>
<data>47F36</data>
<data>47F38</data>
<data>47F3A</data>
<data>47F3C</data>
<data>47F3E</data>
<data>47F40</data>
<data>47F42</data>
<data>47F44</data>
<data>47F46</data>
<data>47F48</data>
<data>47F4A</data>
<data>47F4C</data>
<data>47F4E</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 2 Hex" category="Front/Rear_02" address="47f50" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="40">
<data>47F50</data>
<data>47F52</data>
<data>47F54</data>
<data>47F56</data>
<data>47F58</data>
<data>47F5A</data>
<data>47F5C</data>
<data>47F5E</data>
<data>47F60</data>
<data>47F62</data>
<data>47F64</data>
<data>47F66</data>
<data>47F68</data>
<data>47F6A</data>
<data>47F6C</data>
<data>47F6E</data>
<data>47F70</data>
<data>47F72</data>
<data>47F74</data>
<data>47F76</data>
<data>47F78</data>
<data>47F7A</data>
<data>47F7C</data>
<data>47F7E</data>
<data>47F80</data>
<data>47F82</data>
<data>47F84</data>
<data>47F86</data>
<data>47F88</data>
<data>47F8A</data>
<data>47F8C</data>
<data>47F8E</data>
<data>47F90</data>
<data>47F92</data>
<data>47F94</data>
<data>47F96</data>
<data>47F98</data>
<data>47F9A</data>
<data>47F9C</data>
<data>47F9E</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 3 Hex" category="Front/Rear_02" address="47fa0" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="12">
<data>47FA0</data>
<data>47FA2</data>
<data>47FA4</data>
<data>47FA6</data>
<data>47FA8</data>
<data>47FAA</data>
<data>47FAC</data>
<data>47FAE</data>
<data>47FB0</data>
<data>47FB2</data>
<data>47FB4</data>
<data>47FB6</data>
</table>
</table>
--------
3) Download the following ROM: 88590015_front-rear_O2_patched_v6t.zip
4) Open the ROM in ECUFlash. Find the newly added entries in this patched ROM, and copy the values over to your ROM.
5) If your 1/mL and bL/mL values are different than mine, then insert your values into the corresponding tables.
6) Closed loop cruise is controlled by three different tables:
********** End instructions for tephra ROM *************
Closed loop cruise 88590015 patch instructions for non-tephra and tephra ROM
This is quick instructions for installing my "front O2 sim + rear O2 sim" patch for the 88590015 ROM. There are two main features in this patch. The first feature is the rear O2 sim routine. It is always operational, and this is the same routine that makes up my standalone "rear O2 sim" patch that tephra is using in his patched ROMs. The front O2 sim is the second feature of this new patch. It can be enabled and disabled, and has several features that allow custom tailoring the closed loop cruise AFR. With the patch, the closed loop fueling will follow whatever AFR values are inserted into the fuel tables. It also has a feature to set the closed loop AFR to whatever value you want while the engine is warming up. This second feature is nice because a richer AFR can be used during warmup to the help the car run better when its cold.
********** Start instructions for non-tephra ROM *************
1) Wire an analog out from your WBO2 controller into the ECU. Instructions are here.
Skip the "ROM Modifications" part of that how-to, but do everything else. In the last part of that how-to, there are instructions for calculating the scaling formula for EvoScan. The values from that formula will need to be used for the front/rear O2 sim patch. The example formula for EvoScan in that how-to is:
0.03137*x + 9.06
In that example, mL = 0.03137, and bL = 9.06. For this patch, you'll need 1/mL and bL/mL. For this example,
1/mL = 1/0.03137 = 31.9
bL/mL = 9.06/0.03137 = 289
2) Copy the following tables to your ECUFlash "88590015.xml" file:
------ (Don't copy the "-------")
<table name="Rear O2 (ADC 0A) RAM variable" category="Front/Rear_02" address="c2be" type="1D" level="1" scaling="Hex16"/>
<table name="MUT Port for Wideband (12)" category="Front/Rear_02" address="3eece" type="1D" level="1" scaling="Hex16"/>
<table name="Front Narrow Band Sim On/Off" category="Front/Rear_02" address="8734" type="1D" level="1" scaling="uint8"/>
<table name="Cold Engine Global Closed Loop AFR" category="Front/Rear_02" address="8736" type="1D" level="1" scaling="AFR16"/>
<table name="Min Coolant Temp To Use AFR Table" category="Front/Rear_02" address="8738" type="1D" level="1" scaling="Temp"/>
<table name="AFR Table Multiplier High Word" category="Front/Rear_02" address="8740" type="1D" level="1" scaling="Hex16"/>
<table name="AFR Table Multiplier Low Word" category="Front/Rear_02" address="8742" type="1D" level="1" scaling="Hex16"/>
<scaling name="mLinverse" units="1/mL" toexpr="x/8" frexpr="x*8" format="%.1f" min="0" max="100" inc="0.1" storagetype="uint16" endian="big"/>
<table name="LC-1 AFR Correlation 1/mL Value" category="Front/Rear_02" address="873A" type="1D" level="1" scaling="mLinverse"/>
<table name="LC-1 AFR Correlation bL/mL Value" category="Front/Rear_02" address="873C" type="1D" level="1" scaling="uint16"/>
<table name="Front/Rear 02 Sim Hook" category="Front/Rear_02" address="c250" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1" scaling="Hex16">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="10">
<data>C250</data>
<data>C252</data>
<data>C254</data>
<data>C256</data>
<data>C258</data>
<data>C25A</data>
<data>C25C</data>
<data>C25E</data>
<data>C260</data>
<data>C262</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 1 Hex" category="Front/Rear_02" address="4a000" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1" scaling="Hex16">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="40">
<data>4A000</data>
<data>4A002</data>
<data>4A004</data>
<data>4A006</data>
<data>4A008</data>
<data>4A00A</data>
<data>4A00C</data>
<data>4A00E</data>
<data>4A010</data>
<data>4A012</data>
<data>4A014</data>
<data>4A016</data>
<data>4A018</data>
<data>4A01A</data>
<data>4A01C</data>
<data>4A01E</data>
<data>4A020</data>
<data>4A022</data>
<data>4A024</data>
<data>4A026</data>
<data>4A028</data>
<data>4A02A</data>
<data>4A02C</data>
<data>4A02E</data>
<data>4A030</data>
<data>4A032</data>
<data>4A034</data>
<data>4A036</data>
<data>4A038</data>
<data>4A03A</data>
<data>4A03C</data>
<data>4A03E</data>
<data>4A040</data>
<data>4A042</data>
<data>4A044</data>
<data>4A046</data>
<data>4A048</data>
<data>4A04A</data>
<data>4A04C</data>
<data>4A04E</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 2 Hex" category="Front/Rear_02" address="4a050" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="40">
<data>4A050</data>
<data>4A052</data>
<data>4A054</data>
<data>4A056</data>
<data>4A058</data>
<data>4A05A</data>
<data>4A05C</data>
<data>4A05E</data>
<data>4A060</data>
<data>4A062</data>
<data>4A064</data>
<data>4A066</data>
<data>4A068</data>
<data>4A06A</data>
<data>4A06C</data>
<data>4A06E</data>
<data>4A070</data>
<data>4A072</data>
<data>4A074</data>
<data>4A076</data>
<data>4A078</data>
<data>4A07A</data>
<data>4A07C</data>
<data>4A07E</data>
<data>4A080</data>
<data>4A082</data>
<data>4A084</data>
<data>4A086</data>
<data>4A088</data>
<data>4A08A</data>
<data>4A08C</data>
<data>4A08E</data>
<data>4A090</data>
<data>4A092</data>
<data>4A094</data>
<data>4A096</data>
<data>4A098</data>
<data>4A09A</data>
<data>4A09C</data>
<data>4A09E</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 3 Hex" category="Front/Rear_02" address="4a0a0" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="12">
<data>4A0A0</data>
<data>4A0A2</data>
<data>4A0A4</data>
<data>4A0A6</data>
<data>4A0A8</data>
<data>4A0AA</data>
<data>4A0AC</data>
<data>4A0AE</data>
<data>4A0B0</data>
<data>4A0B2</data>
<data>4A0B4</data>
<data>4A0B6</data>
</table>
</table>
--------
3) Download the following ROM: 88590015_front-rear_O2_patched_v6.zip
4) Open the ROM in ECUFlash. Find the newly added entries in this patched ROM, and copy the values over to your ROM.
5) If your 1/mL and bL/mL values are different than mine, then insert your values into the corresponding tables.
6) Closed loop cruise is controlled by three different tables:
A) - Fuel Table: Set your fuel table to whatever values you want for closed loop cruise.
B) - "Cold Engine Global Closed Loop AFR": AFR you want to use while the engine is warming up. 14.7:1 is a good number for stock cams. Something a little richer might help for bigger cams.
C) - "Min Coolant Temp To Use AFR Table": Coolant temp where ECU will begin using the fuel table for AFR control. I suggest a value of about 76C.
7) Upload the ROM to your ECU, and that's it.B) - "Cold Engine Global Closed Loop AFR": AFR you want to use while the engine is warming up. 14.7:1 is a good number for stock cams. Something a little richer might help for bigger cams.
C) - "Min Coolant Temp To Use AFR Table": Coolant temp where ECU will begin using the fuel table for AFR control. I suggest a value of about 76C.
********** End instructions for non-tephra ROM *************
********** Start instructions for tephra ROM *************
1) Wire an analog out from your WBO2 controller into the ECU. Instructions are here.
Skip the "ROM Modifications" part of that how-to, but do everything else. In the last part of that how-to, there are instructions for calculating the scaling formula for EvoScan. The values from that formula will need to be used for the front/rear O2 sim patch. The example formula for EvoScan in that how-to is:
0.03137*x + 9.06
In that example, mL = 0.03137, and bL = 9.06. For this patch, you'll need 1/mL and bL/mL. For this example,
1/mL = 1/0.03137 = 31.9
bL/mL = 9.06/0.03137 = 289
2) Copy the following tables to your ECUFlash "88590015.xml" file:
------ (Don't copy the "-------")
<table name="Rear O2 (ADC 0A) RAM variable" category="Front/Rear_02" address="c2be" type="1D" level="1" scaling="Hex16"/>
<table name="MUT Port for Wideband (12)" category="Front/Rear_02" address="3eece" type="1D" level="1" scaling="Hex16"/>
<table name="Front Narrow Band Sim On/Off" category="Front/Rear_02" address="8734" type="1D" level="1" scaling="uint8"/>
<table name="Cold Engine Global Closed Loop AFR" category="Front/Rear_02" address="8736" type="1D" level="1" scaling="AFR16"/>
<table name="Min Coolant Temp To Use AFR Table" category="Front/Rear_02" address="8738" type="1D" level="1" scaling="Temp"/>
<table name="AFR Table Multiplier High Word" category="Front/Rear_02" address="8740" type="1D" level="1" scaling="Hex16"/>
<table name="AFR Table Multiplier Low Word" category="Front/Rear_02" address="8742" type="1D" level="1" scaling="Hex16"/>
<scaling name="mLinverse" units="1/mL" toexpr="x/8" frexpr="x*8" format="%.1f" min="0" max="100" inc="0.1" storagetype="uint16" endian="big"/>
<table name="LC-1 AFR Correlation 1/mL Value" category="Front/Rear_02" address="873A" type="1D" level="1" scaling="mLinverse"/>
<table name="LC-1 AFR Correlation bL/mL Value" category="Front/Rear_02" address="873C" type="1D" level="1" scaling="uint16"/>
<table name="Front/Rear 02 Sim Hook" category="Front/Rear_02" address="c250" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1" scaling="Hex16">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="10">
<data>C250</data>
<data>C252</data>
<data>C254</data>
<data>C256</data>
<data>C258</data>
<data>C25A</data>
<data>C25C</data>
<data>C25E</data>
<data>C260</data>
<data>C262</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 1 Hex" category="Front/Rear_02" address="47f00" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1" scaling="Hex16">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="40">
<data>47F00</data>
<data>47F02</data>
<data>47F04</data>
<data>47F06</data>
<data>47F08</data>
<data>47F0A</data>
<data>47F0C</data>
<data>47F0E</data>
<data>47F10</data>
<data>47F12</data>
<data>47F14</data>
<data>47F16</data>
<data>47F18</data>
<data>47F1A</data>
<data>47F1C</data>
<data>47F1E</data>
<data>47F20</data>
<data>47F22</data>
<data>47F24</data>
<data>47F26</data>
<data>47F28</data>
<data>47F2A</data>
<data>47F2C</data>
<data>47F2E</data>
<data>47F30</data>
<data>47F32</data>
<data>47F34</data>
<data>47F36</data>
<data>47F38</data>
<data>47F3A</data>
<data>47F3C</data>
<data>47F3E</data>
<data>47F40</data>
<data>47F42</data>
<data>47F44</data>
<data>47F46</data>
<data>47F48</data>
<data>47F4A</data>
<data>47F4C</data>
<data>47F4E</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 2 Hex" category="Front/Rear_02" address="47f50" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="40">
<data>47F50</data>
<data>47F52</data>
<data>47F54</data>
<data>47F56</data>
<data>47F58</data>
<data>47F5A</data>
<data>47F5C</data>
<data>47F5E</data>
<data>47F60</data>
<data>47F62</data>
<data>47F64</data>
<data>47F66</data>
<data>47F68</data>
<data>47F6A</data>
<data>47F6C</data>
<data>47F6E</data>
<data>47F70</data>
<data>47F72</data>
<data>47F74</data>
<data>47F76</data>
<data>47F78</data>
<data>47F7A</data>
<data>47F7C</data>
<data>47F7E</data>
<data>47F80</data>
<data>47F82</data>
<data>47F84</data>
<data>47F86</data>
<data>47F88</data>
<data>47F8A</data>
<data>47F8C</data>
<data>47F8E</data>
<data>47F90</data>
<data>47F92</data>
<data>47F94</data>
<data>47F96</data>
<data>47F98</data>
<data>47F9A</data>
<data>47F9C</data>
<data>47F9E</data>
</table>
</table>
<table name="Front/Rear 02 Sim Subroutine Part 3 Hex" category="Front/Rear_02" address="47fa0" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="12">
<data>47FA0</data>
<data>47FA2</data>
<data>47FA4</data>
<data>47FA6</data>
<data>47FA8</data>
<data>47FAA</data>
<data>47FAC</data>
<data>47FAE</data>
<data>47FB0</data>
<data>47FB2</data>
<data>47FB4</data>
<data>47FB6</data>
</table>
</table>
--------
3) Download the following ROM: 88590015_front-rear_O2_patched_v6t.zip
4) Open the ROM in ECUFlash. Find the newly added entries in this patched ROM, and copy the values over to your ROM.
5) If your 1/mL and bL/mL values are different than mine, then insert your values into the corresponding tables.
6) Closed loop cruise is controlled by three different tables:
A) - Fuel Table: Set your fuel table to whatever values you want for closed loop cruise.
B) - "Cold Engine Global Closed Loop AFR": AFR you want to use while the engine is warming up. 14.7:1 is a good number for stock cams. Something a little richer might help for bigger cams.
C) - "Min Coolant Temp To Use AFR Table": Coolant temp where ECU will begin using the fuel table for AFR control. I suggest a value of about 76C.
7) Upload the ROM to your ECU, and that's it.B) - "Cold Engine Global Closed Loop AFR": AFR you want to use while the engine is warming up. 14.7:1 is a good number for stock cams. Something a little richer might help for bigger cams.
C) - "Min Coolant Temp To Use AFR Table": Coolant temp where ECU will begin using the fuel table for AFR control. I suggest a value of about 76C.
********** End instructions for tephra ROM *************
Last edited by mrfred; Oct 25, 2009 at 01:21 PM.
#5
Evolved Member
iTrader: (17)
Join Date: Nov 2005
Location: NNJ
Posts: 2,544
Likes: 0
Received 0 Likes
on
0 Posts
https://www.evolutionm.net/forums/sh...d.php?t=358627
Trending Topics
#13
Evolved Member
iTrader: (30)
Join Date: Dec 2003
Location: USA
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
Tephra mentioned a 5.9 ROM version. Might be something he can pass to you to change for that release. Would hate to see you work on the 5.8 and have 5.9 released right after.
A 96530006 version would be cool....we only have 5.1 ATM.
A 96530006 version would be cool....we only have 5.1 ATM.
#14
I probably won't port this version to any other ROMs right away as I think I will revise this patch so that the ECU will not only adjust trims to reach target AFRs but also set the base pulse width using the fuel map. That one I would probably port or hopefully convince tephra to use in his patched ROMs.