Well Tephra I don't know how to log anything but I have made a decision.

 

I tried putting this in and my car didnt start so I had to go back to my other map. Is this common?>

 

Tephra, the immobilizer is no big deal to me. I have had the key/immobilizer thing go out on me in 2 cars and it was a pain! All replaced under warranty but still a hassle.

IDRINKV8, In the map turn off the valet and autovalet Tephra mods or increase the RPM for them. Did you check the immobilizer was moved over correctly?

 

Im not sure Ill check it and see what I can do?

 

See any thing wronk with that line tephra?

 

Just carried out some initial testing on 96260009 on my JDM VIII GSR, map switching seems to work well, I haven't tried the other features yet, but will report back with any problems.

Donation on its way, Tephra!

 

nope looks fine to me..

email me the whole xml file..... tephra @ gmail ...

 

could someone explain the "alternate map load threshold" please?

is this the load that the ecu must be under in order to switch to the altmap?

thanks

 

correct.

applies to both ADC0F and AutoICS switching.

However for ADC0F switching it only applies when switching TO altmaps, not FROM... this is so that if your meth runs out mid pull it will switch to normal maps...

 

^^^^^tephra, you have e-mail......

 

05

Trying the 9694011 rear 02 sim fix

(EDIT: Worked great!)

 

you can 96530006 over the topof 96940011 - just need to disable the immobiliser

 

Interesting. I will give that a shot! Thanks!

 

SmikeEvo, make the switch and you will be very happy with all the fun stuff Tephra has been adding. Been on the 96530006 ROM for awhile now with no issues.

 

tephra - I installed a resistor for the rear 02 sensor this weekend and I am getting the p0037 CEL mentioned earlier in this thread.

All I did was turn on 02 sim, and I also changed the MUT mrfred mentioned for logging via a wideband through the ECU.

The resistor is 75ohm 10watt that J_of_T mentioned in the remove your 02 sensor thread.

Any ideas?