TephraMOD V5.10
#376
#377
Former Sponsor
iTrader: (4)
The OpenPort 2.0 is going to be superseeded by a new LCD touchscreen reflashing device, so I will release both at the same time. So that people can make a decision on which to go with. EvoScan v2.6 Newsletter is ready to go out. I added the priority code for Tephra, and added 1byteload to EvoScan v2.6
(OpenPort 2.0 support will be very soon, I already have openport2.0 working in EvoScan v2.7)
thanks cossie1,
90550001 v5.10
I disabled immobiliser by setting it from 0000 to FFFF
I disabled EGR check by setting perephery2 8A89 to 8D89
I disabled O2 Heater check by setting perephery 56D0 to 16D0
(OpenPort 2.0 support will be very soon, I already have openport2.0 working in EvoScan v2.7)
thanks cossie1,
90550001 v5.10
I disabled immobiliser by setting it from 0000 to FFFF
I disabled EGR check by setting perephery2 8A89 to 8D89
I disabled O2 Heater check by setting perephery 56D0 to 16D0
#378
Evolving Member
iTrader: (19)
Join Date: Jun 2007
Location: Lincolnton, NC
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
The OpenPort 2.0 is going to be superseeded by a new LCD touchscreen reflashing device, so I will release both at the same time. So that people can make a decision on which to go with. EvoScan v2.6 Newsletter is ready to go out. I added the priority code for Tephra, and added 1byteload to EvoScan v2.6
(OpenPort 2.0 support will be very soon, I already have openport2.0 working in EvoScan v2.7)
thanks cossie1,
90550001 v5.10
I disabled immobiliser by setting it from 0000 to FFFF
I disabled EGR check by setting perephery2 8A89 to 8D89
I disabled O2 Heater check by setting perephery 56D0 to 16D0
(OpenPort 2.0 support will be very soon, I already have openport2.0 working in EvoScan v2.7)
thanks cossie1,
90550001 v5.10
I disabled immobiliser by setting it from 0000 to FFFF
I disabled EGR check by setting perephery2 8A89 to 8D89
I disabled O2 Heater check by setting perephery 56D0 to 16D0
I'd really love to get one of those mini PC's.
http://www.newegg.com/Product/Produc...82E16834220270
#380
Newbie
Join Date: Apr 2007
Location: Invercargill New Zealand
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
when i first put the 90550001 rom in my car it kept turning off as well and I found it to be valet mode defaulted to fresh ignition and 114 revs so I just switched valet mode off if that helps evo4mad
#382
EvoM Staff Alumni
iTrader: (16)
Tephra Mod request: I don't use valet mode ever but can we have other things activated by the same method of turning on valet mode (gas pedal)? I would personally like to turn NLTS on and off using that method, or maybe alt maps. Not sure the scope of this but just wanted to put the request in.
Thanks
Thanks
#383
Evolved Member
iTrader: (17)
Tephra Mod request: I don't use valet mode ever but can we have other things activated by the same method of turning on valet mode (gas pedal)? I would personally like to turn NLTS on and off using that method, or maybe alt maps. Not sure the scope of this but just wanted to put the request in.
Thanks
Thanks
#388
In the map tracer's cell,I have to consider 2byte or 1byte(where it can correspond another cell with load slightly different)?
#389
Tyring to work with 94170015 so I can replace my 96420007 map....
1) I switched the CHANGEME to big as I have ecuflash 1.35
2) I copied over the XML stuff and then tried to open the 015 file in evoscan...
Issues I am having:
1) Under Misc section, for Wastegate Compensation, I get the following error:
"The current map description is invalid or incomplete. Please edit the map description to fix the problem and the map will be viewable again"
2) Also, the map title is in light gret and so are some other maps like Init Code and Boost Enhancement Table as well as several others...
3) Also, I See that Tephra suggests to remove Boost Desired Engine Load #2 and #3, only #1 matters anymore, but I have #1, #2, #3 and #4...should I remove #4 as well...
<table name="Boost Desired Engine Load # 1" address="44f8">
<table name="RPM" address="6982" elements="16"/>
</table>
<table name="Boost Desired Engine Load # 2" address="450e">
<table name="RPM" address="6982" elements="16"/>
</table>
<table name="Boost Desired Engine Load # 3" address="4524">
<table name="RPM" address="6982" elements="16"/>
</table>
<table name="Boost Desired Engine Load # 4" address="453a">
<table name="RPM" address="6982" elements="16"/>
</table>
4) Remove/Rename your current "Base Wastegate Duty" #2 and #3, only #1 matters anymore - My 015 map does not have #1, #2 or #3
I am n00b to this, so I could be doing something wrong!
Thanks!
1) I switched the CHANGEME to big as I have ecuflash 1.35
2) I copied over the XML stuff and then tried to open the 015 file in evoscan...
Issues I am having:
1) Under Misc section, for Wastegate Compensation, I get the following error:
"The current map description is invalid or incomplete. Please edit the map description to fix the problem and the map will be viewable again"
2) Also, the map title is in light gret and so are some other maps like Init Code and Boost Enhancement Table as well as several others...
3) Also, I See that Tephra suggests to remove Boost Desired Engine Load #2 and #3, only #1 matters anymore, but I have #1, #2, #3 and #4...should I remove #4 as well...
<table name="Boost Desired Engine Load # 1" address="44f8">
<table name="RPM" address="6982" elements="16"/>
</table>
<table name="Boost Desired Engine Load # 2" address="450e">
<table name="RPM" address="6982" elements="16"/>
</table>
<table name="Boost Desired Engine Load # 3" address="4524">
<table name="RPM" address="6982" elements="16"/>
</table>
<table name="Boost Desired Engine Load # 4" address="453a">
<table name="RPM" address="6982" elements="16"/>
</table>
4) Remove/Rename your current "Base Wastegate Duty" #2 and #3, only #1 matters anymore - My 015 map does not have #1, #2 or #3
I am n00b to this, so I could be doing something wrong!
Thanks!
Last edited by EvoIXMR; Oct 7, 2008 at 11:58 PM.