TephraMOD V5.10
#649
iTrader: (27)
Ok! I logged MUT 42 after modding the rom. I am getting 0 with the switch off and 4 with the switch on. Is this correct?
I did change the IGN tables at idle between maps and the car seems to react to changes in timing.
I am getting 4.69 VDC with the switch on in pin 64. BTW, I am on 88590015!
I did change the IGN tables at idle between maps and the car seems to react to changes in timing.
I am getting 4.69 VDC with the switch on in pin 64. BTW, I am on 88590015!
#653
ok you need to add this to your 96530006.xml
Then in ecuflash change it from 0x56DA to 0x56D2 - if its not 56DA to start with post it up and I will tell u what to change it too.
Code:
<table name="ECU Periphery0 Hex" category="Periphery" address="faa" type="1D" level="2" scaling="Hex16"/>
#654
ok, i do this, i put 0x56D2, but now what i put in my imobilizer code? nothing or "FFFF" like a ralliart map? because i lost my code.
thanks.
ps: it was ok, ecuflash tell me 56DA.
thanks.
ps: it was ok, ecuflash tell me 56DA.
#658
Evolved Member
iTrader: (8)
PLEASE HELP TEPHRA!!!!! well iv been trying to get an inspection sticker on my car for the last month now and all i could come up with is that the rear O2 deleat cheat is screwing me up so can u confirm somthing for me.... well here in massachusettes i need an OBD2 check to get a stick and when the computer gets hooked up to my car i need a readiness code sent to his comp from the
1.O2 sensor
2.O2 sensor heater
3.catalyst
which all 3 are sent to the comp saying not ready.. so my question is when this o2 deleat is patched in is it now imobilized from sending out any codes to an obd2 scanner for an emmisions check
thanks in advanced for any help .. i just dont want to take my exhaust off again to take my wide band out lol
1.O2 sensor
2.O2 sensor heater
3.catalyst
which all 3 are sent to the comp saying not ready.. so my question is when this o2 deleat is patched in is it now imobilized from sending out any codes to an obd2 scanner for an emmisions check
thanks in advanced for any help .. i just dont want to take my exhaust off again to take my wide band out lol
#659
Evolving Member
iTrader: (19)
Join Date: Jun 2007
Location: Lincolnton, NC
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
PLEASE HELP TEPHRA!!!!! well iv been trying to get an inspection sticker on my car for the last month now and all i could come up with is that the rear O2 deleat cheat is screwing me up so can u confirm somthing for me.... well here in massachusettes i need an OBD2 check to get a stick and when the computer gets hooked up to my car i need a readiness code sent to his comp from the
1.O2 sensor
2.O2 sensor heater
3.catalyst
which all 3 are sent to the comp saying not ready.. so my question is when this o2 deleat is patched in is it now imobilized from sending out any codes to an obd2 scanner for an emmisions check
thanks in advanced for any help .. i just dont want to take my exhaust off again to take my wide band out lol
1.O2 sensor
2.O2 sensor heater
3.catalyst
which all 3 are sent to the comp saying not ready.. so my question is when this o2 deleat is patched in is it now imobilized from sending out any codes to an obd2 scanner for an emmisions check
thanks in advanced for any help .. i just dont want to take my exhaust off again to take my wide band out lol
And download/install scantech so you know when everything passes before making another trip to an inspection station.
Last edited by steadly2004; Dec 1, 2008 at 01:36 PM.