TephraMOD V5.10
#871
Evolving Member
iTrader: (2)
Join Date: May 2008
Location: Michigan
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
I'll walk outside now and give it another shot. Will update this post in a minute.
Edit: Didn't work with auto set to 0 and valet set to 1. Didn't work with auto set to 1 and valet set to 0. Didn't work with everything set to 0. I couldn't even get the CEL to flash. I held it for up to 30 seconds and it just stayed solid (like it does with ignition on, car not running)
See it doesn't make sense to me. I can have everything set to 0's for tephra mods and when it was working I'll still have to use the pedal to start my car and the CEL will still flash for knock.
Edit: Didn't work with auto set to 0 and valet set to 1. Didn't work with auto set to 1 and valet set to 0. Didn't work with everything set to 0. I couldn't even get the CEL to flash. I held it for up to 30 seconds and it just stayed solid (like it does with ignition on, car not running)
See it doesn't make sense to me. I can have everything set to 0's for tephra mods and when it was working I'll still have to use the pedal to start my car and the CEL will still flash for knock.
Last edited by RyeLou; Mar 1, 2009 at 03:51 PM.
#873
Evolving Member
iTrader: (2)
Join Date: May 2008
Location: Michigan
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, between each change I uploaded it back into the car.
The results were what I posted above. Car turns over but will not start.
The results were what I posted above. Car turns over but will not start.
Last edited by RyeLou; Mar 1, 2009 at 06:17 PM.
#874
Evolving Member
Join Date: Mar 2005
Location: USA & GR
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Quick question...is the 9653006 ROM on the first page, the most updated version? (I am asking because people are ironing-out bugs and I am not sure if it gets updated accordingly). Tephra?
#877
Evolving Member
Join Date: Mar 2005
Location: USA & GR
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
#880
Evolved Member
iTrader: (16)
Finally hooked up jacks harness and updated on v5.10 with ecu boost control, everything is working fine but the ecu isnt responding to alt-map switching. pinned 42 there wasnt any pin i had to take out so was just pin and set everything up. led goes on and off like it should but its not switching maps
am I the only guy with a 05 rs moved to the edm 96530006? my friend said he had to remove a pin in his ecu to put the pin in?? mine was already empty
am I the only guy with a 05 rs moved to the edm 96530006? my friend said he had to remove a pin in his ecu to put the pin in?? mine was already empty
#881
not sure on the pins - I wouldn't worry if there wasn't a pin there... just double check you got the right pin
Can you log MUT83 - that's the voltage (formula = x*5/255) being appiled to the pin.
you should be able to see it going up/down when you switch the switch
Do you have MasterAltmaps = ADC0F (2???)
Can you log MUT83 - that's the voltage (formula = x*5/255) being appiled to the pin.
you should be able to see it going up/down when you switch the switch
Do you have MasterAltmaps = ADC0F (2???)
#882
Evolved Member
iTrader: (16)
not sure on the pins - I wouldn't worry if there wasn't a pin there... just double check you got the right pin
Can you log MUT83 - that's the voltage (formula = x*5/255) being appiled to the pin.
you should be able to see it going up/down when you switch the switch
Do you have MasterAltmaps = ADC0F (2???)
Can you log MUT83 - that's the voltage (formula = x*5/255) being appiled to the pin.
you should be able to see it going up/down when you switch the switch
Do you have MasterAltmaps = ADC0F (2???)
it was the alt map load threshold and alt map time to activate values that we changed that we should've left alone
I have MasterAltmaps ADC0F (1)
Tephra mod altmap switching and ecu control boost FTMFW so much better of a failsafe system then cutting boost to wastegate as well as having a non methonal map to switch too. I'll do more testing tomorrow I'm burnt out
Last edited by wesside; Mar 14, 2009 at 09:39 PM.