TephraMOD V5.10
#92
On a 7 ecu I think it would need to go into pin 43, as that is the pin used looking at the evo 8 260 ecu pinout.
But it doesn't say if that is the top or bottom clutch switch.
But it doesn't say if that is the top or bottom clutch switch.
#93
Evolving Member
iTrader: (1)
Join Date: Jul 2006
Location: Victorville, CA
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
I integrated the XML code into ECUFLASH for 88590015 and all the values were showing correctly in ECUFlash except for the NLTS TPS Threshold which showed as '...' To resolve this I had to add the following line of code in the 88590015.xml file:
<scaling name="ThrottlePercentage" units="%" toexpr="x/255*100" frexpr="x*255/100" format="%.0f" min="0" max="100" inc="1" storagetype="uint16"/>
I won't be able to test it in my car until tonight to ensure everything is working correctly.
<scaling name="ThrottlePercentage" units="%" toexpr="x/255*100" frexpr="x*255/100" format="%.0f" min="0" max="100" inc="1" storagetype="uint16"/>
I won't be able to test it in my car until tonight to ensure everything is working correctly.
#94
Evolving Member
Yeap, pinout 43 that is. On evo IV-VI, do you have to step on the clutch before crank to start? VII have that switch. I wonder if I could relocate that switch to upper and ecu pin to 43 can do the trick. :P
#96
EvoM Community Team
iTrader: (15)
Added some pre patched roms to the wiki for 88590015:
https://www.evolutionm.net/forums/sh...7&postcount=54
There's base v.10, JDM MAP, and Direct Boost Control.
https://www.evolutionm.net/forums/sh...7&postcount=54
There's base v.10, JDM MAP, and Direct Boost Control.
#97
Evolved Member
iTrader: (2)
Join Date: Aug 2006
Location: Ohio
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
I added it from the XML that cossie posted on page 4 and that fixed it.
<scaling name="ThrottlePercentage" units="%" toexpr="x/255*100" frexpr="x*255/100" format="%.0f" min="0" max="100" inc="1" storagetype="uint16"/>
(into 88590015.xml)
Also, for the record, the default seems to be 98%, not 100%. =)
#100
Evolving Member
Join Date: Apr 2008
Location: New Zealand
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
ok i'll pm you to get your e-mail so i can send the ROM. and yeah i was stationary (actually i was parked and i just wanted to see if it worked) there's no special trick to it aye?? just stop and rev?? i dont need to be in gear or do anything else????
thanks cossie
#101
No there is no need to do anything special.
Just be stationary and hit the throttle.
If your gentle on the pedal it just bounces off the set limit, if you hit the throttle hard it will bounce off the set limit and build a little boost
Just be stationary and hit the throttle.
If your gentle on the pedal it just bounces off the set limit, if you hit the throttle hard it will bounce off the set limit and build a little boost