TephraMOD V5.10
#1051
Evolved Member
iTrader: (22)
Join Date: Nov 2003
Location: Northern KY near Cincy
Posts: 2,408
Likes: 0
Received 6 Likes
on
6 Posts
I noticed that after I deleted the boost enhancemen junk from my XMLs i started getting all kinds of knock.
#1052
Evolved Member
iTrader: (30)
Join Date: Dec 2003
Location: USA
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
I am using 1.4 for the 1byte load factor and hitting 350 load. This is running 33 psi. How do you get around boost cut? I only hit this around 4500-4800 in 4th gear, everytime she completely hits a wall then comes right back. Logs show a hit of 10 knock then it fades away as boost comes back.
Thoughts?
Thoughts?
#1055
Evolved Member
iTrader: (30)
Join Date: Dec 2003
Location: USA
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
My boost cut load limit is at 319 and my boost timer is 1000ms. If I move the timer to 10000ms, that should work? Can the load limit be raised past 319 and the ECU will understand. IF so I will raise to 375 or so.
#1060
Newbie question. I have tried to search some kind of tutorial about applying tephra patches and any other relevant info, but didn't succeed very well. In particular I only needs answer to question that can I apply tephra mods to stock rom? To be specific I would only need the o2 simulator. So If I apply the xml changes to ecuflash rom metadata and disable all the other options except the o2 simulator, would that work? Or do I need to copy something to the stock rom? Is it even possible to do things this way or is it always so that I copy stuff from stock rom to tephra modified rom?
#1062
I just downloaded V5.10, and now have an issue
According to my boost guage I'm running aprox 23-24 PSI.
With the new patch, as soon as it reaches that PSI, brick wall...fuel cut.
I've checked boost Cut load...all set to 290....exactly like my original flash
I've checked Boost cut delay....set to 1000.....exactly like my original flash
As far as I can see, everything else is copied correctly.
Any help would be appreciated.
For now I flashed it back to my original(pre tephra mod) and it's working properly.
I'm new to all this so please be patient...lol
Thanks
According to my boost guage I'm running aprox 23-24 PSI.
With the new patch, as soon as it reaches that PSI, brick wall...fuel cut.
I've checked boost Cut load...all set to 290....exactly like my original flash
I've checked Boost cut delay....set to 1000.....exactly like my original flash
As far as I can see, everything else is copied correctly.
Any help would be appreciated.
For now I flashed it back to my original(pre tephra mod) and it's working properly.
I'm new to all this so please be patient...lol
Thanks
#1065
According to the log, this is what it was showing at the time of the cut
Load Calc = 244.01
Load MUT2= 241.56
Again, I'm new so hopefully this is what you're looking for.
**edit*** I might reflash it and go do another log. Just to verify I'm seeing this at the right section of the excel sheet.
Load Calc = 244.01
Load MUT2= 241.56
Again, I'm new so hopefully this is what you're looking for.
**edit*** I might reflash it and go do another log. Just to verify I'm seeing this at the right section of the excel sheet.
Last edited by INEVOIX; May 31, 2009 at 07:14 PM.