TephraMOD V5.10
#112
Evolved Member
iTrader: (2)
Did some more testing on 88590015 this morning ...
Valet limit working
Map switching working
NLTS working
I did not test the NLTS load threshold though.
I have one question ... I have the valet set time at 3 seconds and the CEL flash for valet at 4 seconds. When testing this morning, I noticed that when you first set valet mode the CEL flashes, but it doesn't flash on subsequent starts if the mode is left enabled. Also, the CEL flashed on disable ... is this correct. The flash on disable confused me a bit ...
Valet limit working
Map switching working
NLTS working
I did not test the NLTS load threshold though.
I have one question ... I have the valet set time at 3 seconds and the CEL flash for valet at 4 seconds. When testing this morning, I noticed that when you first set valet mode the CEL flashes, but it doesn't flash on subsequent starts if the mode is left enabled. Also, the CEL flashed on disable ... is this correct. The flash on disable confused me a bit ...
#113
ok the deal is (from memory and hopefully right)
on fresh ignition (ie key out for at least 10 secs):
if valet is enabled - then fast flash
if valet is not enabled - then no flash
on manually swapping valet (holding TPS):
if valet has just been enabled - fast flash
if valet has just been disabled - slow flash
So at no time should you see a slow flash on fresh ignition...
This is all regardless of autovalet as that gets setup b4 the flashing is done...
on fresh ignition (ie key out for at least 10 secs):
if valet is enabled - then fast flash
if valet is not enabled - then no flash
on manually swapping valet (holding TPS):
if valet has just been enabled - fast flash
if valet has just been disabled - slow flash
So at no time should you see a slow flash on fresh ignition...
This is all regardless of autovalet as that gets setup b4 the flashing is done...
#116
Evolved Member
iTrader: (2)
ok the deal is (from memory and hopefully right)
on fresh ignition (ie key out for at least 10 secs):
if valet is enabled - then fast flash
if valet is not enabled - then no flash
on manually swapping valet (holding TPS):
if valet has just been enabled - fast flash
if valet has just been disabled - slow flash
So at no time should you see a slow flash on fresh ignition...
This is all regardless of autovalet as that gets setup b4 the flashing is done...
on fresh ignition (ie key out for at least 10 secs):
if valet is enabled - then fast flash
if valet is not enabled - then no flash
on manually swapping valet (holding TPS):
if valet has just been enabled - fast flash
if valet has just been disabled - slow flash
So at no time should you see a slow flash on fresh ignition...
This is all regardless of autovalet as that gets setup b4 the flashing is done...
Anything you specifically need tested on the 88590015 ROM? I've got map switching, psi based boost control, etc. Just let me know.
#117
Evolving Member
#118
Evolved Member
iTrader: (17)
Join Date: Nov 2005
Location: NNJ
Posts: 2,544
Likes: 0
Received 0 Likes
on
0 Posts
http://evoecu.logic.net/wiki/Image:9...10fix-mods.zip
Is it simply a tephra v5.10 rom with instructions (the same file downloaded from the first post in this page?)
#120
Evolving Member
Join Date: Jun 2007
Location: NorCal
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone with 88590015 tried the rear o2 sim yet?