Car shuts off/ Bucks at 60% throttle 2100 RPMS 6 psi boost
#18
Evolved Member
Thread Starter
iTrader: (33)
Join Date: Aug 2006
Location: St. Louis
Posts: 1,182
Likes: 0
Received 0 Likes
on
0 Posts
I tested the car cold...when its clod it wont buck...I tried it 3 times....no problems...and soon as it got warm it came back.
I also looked at the Boost Desired table...whats with the dip here? This is off my stock map. I have a MBC is this even relevent?
I also looked at the Boost Desired table...whats with the dip here? This is off my stock map. I have a MBC is this even relevent?
Last edited by Turbo Kyle; Aug 28, 2008 at 12:13 AM.
#25
Evolved Member
Thread Starter
iTrader: (33)
Join Date: Aug 2006
Location: St. Louis
Posts: 1,182
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, I fixed it. I had the lean spool messed up. My ECU did like when I set the start/stop to 2500. Aaron fixed it for me by turning of lean spool in the XML area. The car is fine now....other than that fact I have to retune the whole car.
#28
Evolving Member
iTrader: (2)
I had this problem once, (after a few tests) it was related to the open loop transition at that RPM. I just lowered the load at that RPM cell and it transitioned from closed to open without the hiccup.
...i also stopped logging from <2500rpm
edit: i also had a similar problem when messing with the boost-enhancement/lean spool tables.
...i also stopped logging from <2500rpm
edit: i also had a similar problem when messing with the boost-enhancement/lean spool tables.