knock sum count
#1
Newbie
Thread Starter
Join Date: Mar 2006
Location: appleton, wi
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
knock sum count
what is the best knock sum count... i have a sum count of 8 and 9... i was told it was fine and it runs better then it ever has before... please give me input...
#4
Account Disabled
hit him in the face 8 times
tell him knocksums are like punches to the face. you want ZERO if you can. So if he says 8 is ok, then hit him in the face 8 times. its hard or nearly impossible to get 0 everytime. But 1-2 on ocasion is nothing to be alarmed at. 8 at any time is BAD BAD BAD BAD BAD
#5
Newbie
Thread Starter
Join Date: Mar 2006
Location: appleton, wi
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
it was actaully a guy at a good named shop around my area... anyone have a email i could send the log to see if it is bad!!... it wasnts a full 4th gear pull it was a track log
Trending Topics
#11
Evolved Member
iTrader: (3)
It never ceases to amaze me what some "Tuners", from what we think is a respectable shop, will tell you, when they know you dont know enough to call them out on it! My first experience was as bad as this if not worse, cause the tuner didnt even tell me **** about my tune. Intake, DP, CB, FP. Here ya go 15hp and 20tq increase from stock!
I would talk to this so called tuner and see if you can get this squared away, but then again do you really want some1 like this to touch your car again... Anything over an "occasional" 1-2 counts is unacceptable from a "pro tuner". I would recommend getting the equipment needed to flash and learn to do it yourself. If I can do it, so can you or any1!!!
I would talk to this so called tuner and see if you can get this squared away, but then again do you really want some1 like this to touch your car again... Anything over an "occasional" 1-2 counts is unacceptable from a "pro tuner". I would recommend getting the equipment needed to flash and learn to do it yourself. If I can do it, so can you or any1!!!
#12
Account Disabled
iTrader: (465)
xs power exhuast manifold and dump pipe
k&n intake
underdrive pulley
greddy hard pipes
HKS bov
3 gauge apillor
dyno tune wideband
autometer narrowband
blitz turbo timer
LC-1 wide band o2 sencer
We don't remember ever seeing any knocksums out of the ordinary from any of our Milwaukee customers.
If we have tuned the car, send us a datalog. If not, then best of luck.
0-3 sums is about as much as we tolerate.
Furthermore, you might take a second look at your mod list if your car is not at its potential.
k&n intake
underdrive pulley
greddy hard pipes
HKS bov
3 gauge apillor
dyno tune wideband
autometer narrowband
blitz turbo timer
LC-1 wide band o2 sencer
We don't remember ever seeing any knocksums out of the ordinary from any of our Milwaukee customers.
If we have tuned the car, send us a datalog. If not, then best of luck.
0-3 sums is about as much as we tolerate.
Furthermore, you might take a second look at your mod list if your car is not at its potential.
#15
Newbie
Thread Starter
Join Date: Mar 2006
Location: appleton, wi
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
just checked with a guy that tunes cars umm what would make my car once in boost cut octane levels to 0 but at idle and everythen else other then boost be 100
also throwing codes
P0137
P0403 EGR Solenoid. (different intake manifold egr deleted)
P0340 Crankshaft Position Sensor circuit.
P0335 Crankshaft Position Sensor circuit.
P0325 Knock Sensor 1 circuit.
also throwing codes
P0137
P0403 EGR Solenoid. (different intake manifold egr deleted)
P0340 Crankshaft Position Sensor circuit.
P0335 Crankshaft Position Sensor circuit.
P0325 Knock Sensor 1 circuit.