EvoScan v2.6 And New EvoScan GPS/Logger/Reflashing Touchscreen Review
#874
Thread Starter
Former Sponsor
iTrader: (4)
Otherwise if you still have problems, you can log a helpdesk call, www.evoscan.org/helpdesk and I can monitor your PC or I can have EvoScan on 5 pcs here and leave them running overnight.
#875
Account Disabled
iTrader: (38)
IIRC it usually happens when I'm manipulating something while it's logging. Setting up gauges, checking/unchecking items, hiding items not being used. I may just stop logging before doing that sort of thing and see if the BSOD goes away for starters and make sure I don't bump the cable. I was just curious if anyone else ran into my issue. If I can't narrow it down I'll open a support ticket and go from there.
#876
Evolved Member
iTrader: (3)
I keep getting a "shutdown error" w/ 2.5... Car off, plug in the tactrix and the WB serial to usb from zeitronix, and start car and 1 out of 10 or so tries, and it completely shuts my comp down... Followed the link to try and figure out whats happening, and its telling me I have a "shutdown error" or "bluescreen". I dont get a bluescreen, but my comp. just shuts down... Im thinking this has to do w/ the laptop, and not the software, but Im curious to see if any1 else has had this issue...
#877
You have really been busy Hamish, holy crap the updates are pouring in! Great job.
I used the newest version to log two cars today, EVO8 and EVOX. EVO8-9 logging has worked do well for so long I don't think there is much more you can do to improve it. The EVOX has come along great lately. I am sure you are working on the things I am going to mention, if not and you have time, please put them on your list. Also if the problem is on my end please let me know what to do.
The air intake temp reads the same values at the coolant temp on the EVOX, that is the only thing I noticed not reading correctly right now, if it's on my end please let me know.
It would be great to have calculated or 2 byte load. It would also be great if since the EVOX already has a 3 bar map sensor if it would log actual boost.
Other than those few things, I am one happy dude!
I used the newest version to log two cars today, EVO8 and EVOX. EVO8-9 logging has worked do well for so long I don't think there is much more you can do to improve it. The EVOX has come along great lately. I am sure you are working on the things I am going to mention, if not and you have time, please put them on your list. Also if the problem is on my end please let me know what to do.
The air intake temp reads the same values at the coolant temp on the EVOX, that is the only thing I noticed not reading correctly right now, if it's on my end please let me know.
It would be great to have calculated or 2 byte load. It would also be great if since the EVOX already has a 3 bar map sensor if it would log actual boost.
Other than those few things, I am one happy dude!
#882
Account Disabled
iTrader: (8)
Joined: Sep 2007
Posts: 3,366
Likes: 0
Received 0 Likes
on
0 Posts
From: Hayward
This is not to take anything away from Hamish, as his logger works awesome and I have been using it for years since his first ever beta. The reason I use DataLogLab as well is because the visualization and log analyzing tools are currently superior.
Espically for large data files like laps around a race track and not single pulls:
Of course none of that would exist to visualize without EvoScan.
Last edited by GST Motorsports; Jul 29, 2009 at 08:12 PM.
#883
Evolved Member
iTrader: (2)
Joined: Nov 2003
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
From: Mtz, CA
Holy snap, those graphs are oh so pretty, LOL. Ya when I meant import I meant using the EvoScan logs but Log Works for visuals. Hmm I should look into Log Works maybe then....god all these programs and choosing which to buy is hard...and hard on the personal wallets too. LOL.