Slo_crx1

iTrader: (9)

This would be a highly useful tool, the other day in mid-20's temps I spiked almost 28psi in 1st and 2nd gear, but once it warmed up into the mid 50's a few days later I had the normal 23psi again.

VGergo

iTrader: (3)

Hello,

If i copy this :

<table name="MAF IAT WGDC Correction" category="Global Boost Control Settings" address="512dc" type="2D" scaling="OffsetWGDC">
<table name="Degrees" address="512c6" type="Y Axis" elements="7" scaling="Temp"/>
</table>

in the 88580714 V7 will this awsome correction work ?

How will the ecu now to make correction only if the base wgdc not 100 ?

Nowdays did someone play with this table on 3 port solenoid ?

tephra

iTrader: (6)

You need to run V7 to be able to use that table

VGergo

iTrader: (3)

and in every V7 ? 88580714 jdm evo 9 V7 too ? I can see right values when I copy that things in the xml, but will this work ?

tephra

iTrader: (6)

i cant remember if different V7 roms have different locations for that table..

Just use the XML included in the V7 zip for the ROMID you are working on...