03whitegsr

iTrader: (8)

I noted a lot of tip-in knock initially with the 94170015 v5.10 ROM.

I started over fresh with a known good ROM and xml and I really haven't had much of an issue since. I get the occasional knock light that I believe is a false knock event, but it's pretty rare now.

I don't know what went wrong on the first time I installed 94170015 from 94170008, but it was pretty much every time I got on it I was having an issue with false knock and I could not tune it out. I've just caulked it up to something I did wrong and moved on and the car runs great on v5.10 and I haven’t even touched the newly defined knock tables.

If you are having issues, I'd suggest starting fresh with a known good ROM and XML.

Jim in Tucson

iTrader: (3)

Are you normally using the Alt Maps or the standard maps?

GST Motorsports

iTrader: (8)

Good suggestion Jim,

Make sure you have the alt map switch over load point tuned correctly.

fostytou

iTrader: (15)

Doesn't the load switchover point only become an issue if you are trying to switch to that map over the load threshold?

nonschlont

iTrader: (3)

do I need another pin for the cable/ecu to get the alt. maps working w/ ICS, or can I just enable alt maps master ACD0F=1, AutoICS=2. Im a lil behind, trying to get a grap on this...

TIA

tephra

iTrader: (6)

u got the autoics switch in your car?

nonschlont

iTrader: (3)

I think I may be well behind... I am thinking of the ACD button activation method.