scheides

iTrader: (10)

Kracka and I tried this on his car today; it works! He's spending QT with is girl right now but just wanted to relay the message: he had a big smile on his face when we ran the car w/ the old resistor crap unplugged

Kracka

iTrader: (49)

LOL thanks Scheides! She thinks I'm looking up moves right now

Works perfectly though, thanks mrfred!

mrfred

iTrader: (50)

Glad there's no CEL. When you get a chance, can you check the readiness status of all the OBD-II tests? Just want to be sure that everything has completed.

scheides

iTrader: (10)

Heh he's got all his emissions stuff off the car and unplugged per another thread....this will be interesting

I'll try it out on another more stock IX very very soon regardless

PlanoEvo

iTrader: (2)

For those using a antifouler does this patch mean that they can remove the rear o2 sensor completely and put a plug on the pipe where the old antifouler and o2 sensor used to be?

THUB

iTrader: (5)

Unless I'm mistaken, This patch by itself will not allow that because it only simulates the heater circuit, however in tephra's V5.10, there is an O2 sensor that simulates the signal, so together they will allow you to unplug.

mrfred

iTrader: (50)

That's correct. I also have a standalone patch to simulate the rear O2 sensor signal for the 88590015, or a tephra ROM can be used. tephra mentioned somewhere that he is holding out on releasing v6 for this patch.

PlanoEvo

iTrader: (2)

I believe my IX has that rom. So could I use both patches to completely eliminate the rear o2? Maybe I not understanding this patch but why would you need just the heater? My antifouler works just fine.Excuse me for my lack of understanding.

mrfred

iTrader: (50)

Yes, that's correct.

Kracka

iTrader: (49)

How do I do this in EvoScan? Let me know and I'll head down to the garage now.

vmrevo9

iTrader: (33)

what would be needed to eliminate the rear o2 and remove the pin supplying the data to the ECU. i would like to have the ECU log AFR's from my LC-1 wideband

mrfred

iTrader: (50)

Apply this patch along with my wideband AFR logging patch.

inco9nito99

iTrader: (90)

this: https://www.evolutionm.net/forums/5353216-post148.html

except not using the hardware (resistor mod) in conjunction with the newer patch posted in the first post and no rear o2 all togather with all readiness tests 100% a-okay.

fostytou

iTrader: (15)

I'm foaming at the mouth for V6 now!

vmrevo9

iTrader: (33)

well removing the rear o2 sensor completely from the car be necessary when one has the 2 antifoulers installed with the sensor? resaon i ask is so just in case i need to bring it in for warranty work i can return it easily to stock