TephraMOD V6 - testing!
#886
EvoM Community Team
iTrader: (15)
Well now EVOScan is really messing with me. I got it to work but today it is not working. I used to be able to choose the XML / ROM I wanted to use but now I can only pick the ROM. I right click on the graph and it only asks for the ROM not the XML too. Any ideas?
BTW this is EVOScan 2.6 beta 11
I get the same error as before now that I can't select my XML I want to use.
P.S. - how do I set it up so that it is a calculation and not a MUT Request, what post are you referring to?
BTW this is EVOScan 2.6 beta 11
I get the same error as before now that I can't select my XML I want to use.
P.S. - how do I set it up so that it is a calculation and not a MUT Request, what post are you referring to?
https://www.evolutionm.net/forums/7078461-post18.html
#889
Evolved Member
iTrader: (15)
One question I have is that mrfred's MAT patch - are the values in v7 correct? Previously the values were there but, one had to copy mrfred's values from his patched ROM into a specific ROM in order for it to be enabled. Does this need to be done with v7 in order for the MAT patch to function properly? Or is it simply enabled/disabled by selecting it in the Mods drop down menu (0 = disabled 1 = enabled)??
#890
Evolving Member
EDM evo8 96530006.
V7 works fine for me except NLTS. I`m getting consistent knock sum of 30-20 counts on each gear if i use NLTS, since I converted to 96530706, but no knock on regular shifts. Anybody having same problems?
I didnt have any knock on V5.1. Anyway I will check my tranny\motor mounts, downpipe etc... May be it is just pure coincidence...
V7 works fine for me except NLTS. I`m getting consistent knock sum of 30-20 counts on each gear if i use NLTS, since I converted to 96530706, but no knock on regular shifts. Anybody having same problems?
I didnt have any knock on V5.1. Anyway I will check my tranny\motor mounts, downpipe etc... May be it is just pure coincidence...
#892
iTrader: (10)
I tested it on a '05 that was previously running a 96530006 with your v5.10, than I converted it to 96530706. It entered into the alt map function via the TPS indicated by the CEL light flashing but, I wasn't able to verify through logging that it was indeed referencing the alt maps.
#898
Evolved Member
iTrader: (12)
Join Date: Dec 2003
Location: Farmington, NM
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Tephra,
I'm having problems with WGDC on 96530706, after upgrading from 94170015 v 5.10.
No matter what I do, I get 0 WGDC until 120 load, then it goes to 100%. I have 100% WGDC under 180 load, so I don't understand why it's not 100%. WTF. It's making my car very laggy and slow to respond. See my attached rom image. I also notice that the logged WGDC is about 15% higher than what is in my base wgdc map. Could this have anything to do with the fact that 03's start with 100% WGDC and 05's start with 0% WGDC? I logged gear, and it is reading the correct gear, but not following the base WGDC maps. FWIW, when I flash back to 94170015 v 5.10 it's back to 100% WGDC from the get go.
Any help is appreciated.
v5.10 on 94170015 rom
v7 on 9653 rom. notice 0 WGDC until 120 load. Yes I know I need to change my 1 byte load factor to stop it from looping.
Log image
My 9653 ROM settings for boost. Bottom 2 labels are WGDC 100% under load and BCLO
I'm having problems with WGDC on 96530706, after upgrading from 94170015 v 5.10.
No matter what I do, I get 0 WGDC until 120 load, then it goes to 100%. I have 100% WGDC under 180 load, so I don't understand why it's not 100%. WTF. It's making my car very laggy and slow to respond. See my attached rom image. I also notice that the logged WGDC is about 15% higher than what is in my base wgdc map. Could this have anything to do with the fact that 03's start with 100% WGDC and 05's start with 0% WGDC? I logged gear, and it is reading the correct gear, but not following the base WGDC maps. FWIW, when I flash back to 94170015 v 5.10 it's back to 100% WGDC from the get go.
Any help is appreciated.
v5.10 on 94170015 rom
v7 on 9653 rom. notice 0 WGDC until 120 load. Yes I know I need to change my 1 byte load factor to stop it from looping.
Log image
My 9653 ROM settings for boost. Bottom 2 labels are WGDC 100% under load and BCLO
#899
well the "min load ..." table controls when the WG is first acted upon.
but according to that table it should kick in about 86% load...
so I am not sure whats going on...
can you do a 3rd gear pull from like 1800rpm? i need to see the bottom end of the load + wgdc + rpm + tps
but according to that table it should kick in about 86% load...
so I am not sure whats going on...
can you do a 3rd gear pull from like 1800rpm? i need to see the bottom end of the load + wgdc + rpm + tps