tranny temp monitoring on EDM Evo IXs
#1
tranny temp monitoring on EDM Evo IXs
A few people have mentioned something about the ECU monitoring tranny temp on EDM Evo IXs, so I took a look at an 88840016 ROM this evening. It appears that ADC 0E is used to monitor tranny temp. Scaled tranny temp appears to be at RAM address FFFF78CE. (probably the same for 88840017 ROMs as well.) There is no MUT that reads this RAM address, but its easy enough to change one of the MUT table values to 0x78CF (note the use of F and not E), and then tranny temp can be monitored in EvoScan on that MUT channel using the same scaling that is used for air temp and coolant temp.
There is subroutine that sets a flag when the tranny temp exceed 110 deg C (230 F), but I have not run down what the flag controls. Maybe I'll get to that sometime this week if anyone is interested.
If one of you EDM Evo IX guys has time, I would be very interested in seeing a picture of where the tranny temp sensor is mounted. I'd also like to know the part number. Would be great to be able to monitor tranny temp on my MR if the sensor is easily adapted to USDM trannys.
There is subroutine that sets a flag when the tranny temp exceed 110 deg C (230 F), but I have not run down what the flag controls. Maybe I'll get to that sometime this week if anyone is interested.
If one of you EDM Evo IX guys has time, I would be very interested in seeing a picture of where the tranny temp sensor is mounted. I'd also like to know the part number. Would be great to be able to monitor tranny temp on my MR if the sensor is easily adapted to USDM trannys.
#7
Evolving Member
iTrader: (2)
Join Date: Sep 2007
Location: Florida / Lebanon
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
The sensor is actually part of the oil drain plug of the edm 6-speed transmission. I have some pics of the sensor i took before selling my 6-speed and doing the swap.
I'll post them later.
I'll post them later.
Trending Topics
#10
Account Disabled
iTrader: (8)
Join Date: Sep 2007
Location: Hayward
Posts: 3,366
Likes: 0
Received 0 Likes
on
0 Posts
One interesting piece of data I got from having the temp gauge is that the trans runs 8-10c warmer on the hwy without the undertray on a 75* day.
#11
Don't know what you have planned for the car while its on the lift, if you have a gear oil change planned, it would be great to get a few pics of the sensor tip. I'm curious to see if the sensor tip looks like and whether it is actually immersed in gear oil.
#12
Account Disabled
iTrader: (8)
Join Date: Sep 2007
Location: Hayward
Posts: 3,366
Likes: 0
Received 0 Likes
on
0 Posts
My temp sensor isn't OEM (It's a Greddy) but I had Jon@TRE put it right (on his suggestion) above 4th gear so it would sling the oil on it coming off 4th gear so I could monitor that problem gear. Seems to work just fine.
#13
No gear oil change, it is at shop from 2 months after a crash, just rebuilding...
#14
Account Disabled
iTrader: (3)
Join Date: Apr 2006
Location: USA
Posts: 1,029
Likes: 0
Received 0 Likes
on
0 Posts
mrfred,
That would be very useful for the road race guys. Also it will be useful for people like me who would like to tap another temp sensor pre intercooler (I know we have the stock MAF sensor, but this is something special I'm working on). Basically it would be a default temperature input to the ecu that we could scale as needed and utilize as we deem necessary.
I think a safety function would be great. However we already have too much stuff going on in the ecu. I think its best if from now on we just let the user be responsible for his/her own car. If they really want a "safety" warning, just hook up a laptop in your car permanently and set evoscan to trigger a warning buzzer if temp>x.
That would be very useful for the road race guys. Also it will be useful for people like me who would like to tap another temp sensor pre intercooler (I know we have the stock MAF sensor, but this is something special I'm working on). Basically it would be a default temperature input to the ecu that we could scale as needed and utilize as we deem necessary.
I think a safety function would be great. However we already have too much stuff going on in the ecu. I think its best if from now on we just let the user be responsible for his/her own car. If they really want a "safety" warning, just hook up a laptop in your car permanently and set evoscan to trigger a warning buzzer if temp>x.
#15
Evolved Member
Join Date: Apr 2008
Location: Sydney, Australia
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Can you post where the subroutine begins. I am interested to see if some of the code is present in the GT-A with regards to the auto. It definitely has a trans temp sensor and has mapping for the transmission, but it would be good to note if the same sensor is tied in to the engine mapping too.
You would expect if there is engine control with trans temp, that for overtemp it would try to limit load and/or rpm. Interesting to see if it does.
You would expect if there is engine control with trans temp, that for overtemp it would try to limit load and/or rpm. Interesting to see if it does.