I have installed the beta 15 and now it works with my USDM X, but it's very slow, 6-7/sec. with the mode23 patch

 

Mode23 WDGCC USDM Evo 10 52680015-20:

<DataListItem DataLog="N" Color="" Display="Mode23 ActiveWGDC Correction" LogReference="Mode23ActiveWGDCC" RequestID="23808b51" Eval="0.5*x-64" Unit="%" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="255" ChartMin="0" ChartMax="255" ScalingFactor="1" Notes="" Priority="1" Visible="False" />

 

Here are two screenshots of Evo 10 EvoScan Mode23 logs in DataLogLab:





I set it up really quickly just for some tuning and I will clean up the DLL data file later when I have some time.

Mode23 is working great, finally great logging for the Evo 10! Huge thanks to everyone that made it happen!

Mainly what we have for the 8/9, WGDCCorrection (which you posted above already, awesome!) LoadError, etc

You da man!

-Bryan

 

good on ya

how does DLL compare to JoT's VDR?

 

Hey Tephra, have you had a chance to try out the Beta15 version of EvoScan yet. any formulas or ram address I need to update?

 

I wrote graphing and power/torque into evoscan because I found DLL too expensive for most people, too hard to use, and I couldn't be bothered stuffing around with the log template feature. I find the graphs hard to read in DLL, I can't even see my RPM line when I use it. I updated EvoScan beta15 so that it scales the RPM.

 

I'll have to give it another try, I used to get some wild results from it a long time ago whereas DLL was consistent

 

I'm not sure I haven't checked. I have a real dyno at my disposable.

By real I mean actually physically real, not "better" or "a lot more money therefore it's betta".

-Bryan

 

how did you get the boost to stay dis nice, with your pill?

 

It's a Dom 2 that isn't even hitting it's stride yet. There are some other "issues" that need to be addressed with the car.

I'll try and get some stock turbo logs up here soon if you want.

 

just working on trying to make my boost curve nice, working with stock turbo and stock pills/selonoids

 

just bought my 2.0open port cable cant wait to get to see the logs from my evo x and to see how much whp the car is putting in stock form...

 

Can someone figure out the evoscan mode23 address/formula for octane level? Sorry if I missed that. Or, can anyone verify whether the CAN-ID is correct? This is for USDM 52680018. Thanks!

 

Its in my latest Data.xml file that I posted several days ago:

https://www.evolutionm.net/forums/ev...ml#post7188856

 

Thanks mrfred!