Evo X Logging
#646
iTrader: (24)
OK, I am sorry to be an idiot, but I need help.
My ID is 52680018
I open my 52680018.xml with Notepad, and see this:
<rom>
<romid>
<xmlid>52680018</xmlid>
<internalidaddress>5002A</internalidaddress>
<internalidhex>52680018</internalidhex>
<make>Mitsubishi</make>
<market>USDM</market>
<model>Lancer</model>
<submodel>Evolution X</submodel>
<transmission>5MT</transmission>
<year>2008</year>
<flashmethod>mitsucan</flashmethod>
<checksummodule>mitsucan</checksummodule>
<memmodel>M32186F8</memmodel>
</romid>
<include>52680015</include>
</rom>
So basically, I want to copy this data in, and it looks like this:
<rom>
<romid>
<xmlid>52680018</xmlid>
<internalidaddress>5002A</internalidaddress>
<internalidhex>52680018</internalidhex>
<make>Mitsubishi</make>
<market>USDM</market>
<model>Lancer</model>
<submodel>Evolution X</submodel>
<transmission>5MT</transmission>
<year>2008</year>
<flashmethod>mitsucan</flashmethod>
<checksummodule>mitsucan</checksummodule>
<memmodel>M32186F8</memmodel>
</romid>
<include>52680015</include>
<table name="IFMode 0x05 -> 0x23 #1" category="Misc" type="1D" address="0x7f121" scaling="Hex8"/>
<table name="IFMode 0x05 -> 0x23 #2" category="Misc" type="1D" address="0x8ab11" scaling="Hex8"/>
<table name="DoMode 0x42 -> 0x52" category="Misc" type="1D" address="0x8ab16" scaling="Hex16"/>
</rom>
Then I save it in Notepad and close. Correct?
I don't want to screw anything up. Thanks in advance.
My ID is 52680018
I open my 52680018.xml with Notepad, and see this:
<rom>
<romid>
<xmlid>52680018</xmlid>
<internalidaddress>5002A</internalidaddress>
<internalidhex>52680018</internalidhex>
<make>Mitsubishi</make>
<market>USDM</market>
<model>Lancer</model>
<submodel>Evolution X</submodel>
<transmission>5MT</transmission>
<year>2008</year>
<flashmethod>mitsucan</flashmethod>
<checksummodule>mitsucan</checksummodule>
<memmodel>M32186F8</memmodel>
</romid>
<include>52680015</include>
</rom>
So basically, I want to copy this data in, and it looks like this:
<rom>
<romid>
<xmlid>52680018</xmlid>
<internalidaddress>5002A</internalidaddress>
<internalidhex>52680018</internalidhex>
<make>Mitsubishi</make>
<market>USDM</market>
<model>Lancer</model>
<submodel>Evolution X</submodel>
<transmission>5MT</transmission>
<year>2008</year>
<flashmethod>mitsucan</flashmethod>
<checksummodule>mitsucan</checksummodule>
<memmodel>M32186F8</memmodel>
</romid>
<include>52680015</include>
<table name="IFMode 0x05 -> 0x23 #1" category="Misc" type="1D" address="0x7f121" scaling="Hex8"/>
<table name="IFMode 0x05 -> 0x23 #2" category="Misc" type="1D" address="0x8ab11" scaling="Hex8"/>
<table name="DoMode 0x42 -> 0x52" category="Misc" type="1D" address="0x8ab16" scaling="Hex16"/>
</rom>
Then I save it in Notepad and close. Correct?
I don't want to screw anything up. Thanks in advance.
#647
Evolved Member
iTrader: (1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Yes, that is correct
Then open your ROM up in ECUFlash and change the numbers 05 to 23, 05 to 23, and 42 to 52.
Then open your ROM up in ECUFlash and change the numbers 05 to 23, 05 to 23, and 42 to 52.
OK, I am sorry to be an idiot, but I need help.
My ID is 52680018
I open my 52680018.xml with Notepad, and see this:
<rom>
<romid>
<xmlid>52680018</xmlid>
<internalidaddress>5002A</internalidaddress>
<internalidhex>52680018</internalidhex>
<make>Mitsubishi</make>
<market>USDM</market>
<model>Lancer</model>
<submodel>Evolution X</submodel>
<transmission>5MT</transmission>
<year>2008</year>
<flashmethod>mitsucan</flashmethod>
<checksummodule>mitsucan</checksummodule>
<memmodel>M32186F8</memmodel>
</romid>
<include>52680015</include>
</rom>
So basically, I want to copy this data in, and it looks like this:
<rom>
<romid>
<xmlid>52680018</xmlid>
<internalidaddress>5002A</internalidaddress>
<internalidhex>52680018</internalidhex>
<make>Mitsubishi</make>
<market>USDM</market>
<model>Lancer</model>
<submodel>Evolution X</submodel>
<transmission>5MT</transmission>
<year>2008</year>
<flashmethod>mitsucan</flashmethod>
<checksummodule>mitsucan</checksummodule>
<memmodel>M32186F8</memmodel>
</romid>
<include>52680015</include>
<table name="IFMode 0x05 -> 0x23 #1" category="Misc" type="1D" address="0x7f121" scaling="Hex8"/>
<table name="IFMode 0x05 -> 0x23 #2" category="Misc" type="1D" address="0x8ab11" scaling="Hex8"/>
<table name="DoMode 0x42 -> 0x52" category="Misc" type="1D" address="0x8ab16" scaling="Hex16"/>
</rom>
Then I save it in Notepad and close. Correct?
I don't want to screw anything up. Thanks in advance.
My ID is 52680018
I open my 52680018.xml with Notepad, and see this:
<rom>
<romid>
<xmlid>52680018</xmlid>
<internalidaddress>5002A</internalidaddress>
<internalidhex>52680018</internalidhex>
<make>Mitsubishi</make>
<market>USDM</market>
<model>Lancer</model>
<submodel>Evolution X</submodel>
<transmission>5MT</transmission>
<year>2008</year>
<flashmethod>mitsucan</flashmethod>
<checksummodule>mitsucan</checksummodule>
<memmodel>M32186F8</memmodel>
</romid>
<include>52680015</include>
</rom>
So basically, I want to copy this data in, and it looks like this:
<rom>
<romid>
<xmlid>52680018</xmlid>
<internalidaddress>5002A</internalidaddress>
<internalidhex>52680018</internalidhex>
<make>Mitsubishi</make>
<market>USDM</market>
<model>Lancer</model>
<submodel>Evolution X</submodel>
<transmission>5MT</transmission>
<year>2008</year>
<flashmethod>mitsucan</flashmethod>
<checksummodule>mitsucan</checksummodule>
<memmodel>M32186F8</memmodel>
</romid>
<include>52680015</include>
<table name="IFMode 0x05 -> 0x23 #1" category="Misc" type="1D" address="0x7f121" scaling="Hex8"/>
<table name="IFMode 0x05 -> 0x23 #2" category="Misc" type="1D" address="0x8ab11" scaling="Hex8"/>
<table name="DoMode 0x42 -> 0x52" category="Misc" type="1D" address="0x8ab16" scaling="Hex16"/>
</rom>
Then I save it in Notepad and close. Correct?
I don't want to screw anything up. Thanks in advance.
#648
Evolved Member
iTrader: (4)
Join Date: Sep 2004
Location: so cal
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
noize - did you check this out?
https://www.evolutionm.net/forums/ev...lustrated.html
someone correct me if i am wrong, but my understand is that you can make those changes to 52680015 (as shown in the tutorial) because in the 52680018 file it has the line
<include>52680015</include>
so essentially when it reads 52680018 its also pointing to 52680015
https://www.evolutionm.net/forums/ev...lustrated.html
someone correct me if i am wrong, but my understand is that you can make those changes to 52680015 (as shown in the tutorial) because in the 52680018 file it has the line
<include>52680015</include>
so essentially when it reads 52680018 its also pointing to 52680015
#649
Evolved Member
iTrader: (1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
noize - did you check this out?
https://www.evolutionm.net/forums/ev...lustrated.html
someone correct me if i am wrong, but my understand is that you can make those changes to 52680015 (as shown in the tutorial) because in the 52680018 file it has the line
<include>52680015</include>
so essentially when it reads 52680018 its also pointing to 52680015
https://www.evolutionm.net/forums/ev...lustrated.html
someone correct me if i am wrong, but my understand is that you can make those changes to 52680015 (as shown in the tutorial) because in the 52680018 file it has the line
<include>52680015</include>
so essentially when it reads 52680018 its also pointing to 52680015
#655
#660
Evolved Member
iTrader: (6)
25th July 2009: EvoScan v2.6 Beta17 released!
Download EvoScan Beta17 here(registered users only. Unregistered users get your registration number from www.evoscan.com)
- ADDED OBDII DATALOGGING SUPPORT for OpenPort1.3U and OpenPort 2.0
- this will work with ALL vehicles 1996-2008 (OBDII)
(the government should have mandated Generic OBDII be fast, lol! EvoScan makes it as fast as it can, its still a waste of time for Mitsubishi owners, stick with MUTII)
- Relabelled all the protocols and devices.
- More support for OpenPort 2.0 and Evo7/8/9 Actuators+DTC
- More support for 2008/09 JDM EvoX Mode23 (thanks SiC)
- More support for multiple
- Added a new checkbox to "Display only selected items" hides the dataitems you're not logging at that time.
Download EvoScan Beta17 here(registered users only. Unregistered users get your registration number from www.evoscan.com)
- ADDED OBDII DATALOGGING SUPPORT for OpenPort1.3U and OpenPort 2.0
- this will work with ALL vehicles 1996-2008 (OBDII)
(the government should have mandated Generic OBDII be fast, lol! EvoScan makes it as fast as it can, its still a waste of time for Mitsubishi owners, stick with MUTII)
- Relabelled all the protocols and devices.
- More support for OpenPort 2.0 and Evo7/8/9 Actuators+DTC
- More support for 2008/09 JDM EvoX Mode23 (thanks SiC)
- More support for multiple
- Added a new checkbox to "Display only selected items" hides the dataitems you're not logging at that time.
Hamish,
I installed this version and tested how the LM-1 works with it. It is NOT cutting out when I lift off the gas. It works. The LM-1 works with version 17 on my Evo 9. YAY!!!!
Thanks Hamish for fixing this problem.
I still have to test mode23 logging on an Evo X with the LM-1 and see if it works.
Hamish, Logging an Evo X in mode 23 with the LM-1 should be the same as logging an Evo 9? Correct? The LM-1 will not cut off. Right?