Evo X Logging
#769
Former Sponsor
iTrader: (4)
EvoScan v2.7 Beta4
Map Tracer Fixes in v2.7 Beta4
- Download Here
- Now loads xml files rommetadata from ecuflash without relying on an old ecuflash path registry key
- Now loads 2 or levels of xml includes. (which was the case with USDM EvoX xml rommetadata files.)
- Now added the CAN OBDII data.xml file
- Now realtime graphing stays in Sync when ticking more dataitems.
Future Map Tracer suggestion improvements:
- Allow the map tracer to only display the selected range on the Line Graph.
- Allow support for Evo5 roms
If you wish to add to this improvements list, let me know.
Map Tracer Fixes in v2.7 Beta4
- Download Here
- Now loads xml files rommetadata from ecuflash without relying on an old ecuflash path registry key
- Now loads 2 or levels of xml includes. (which was the case with USDM EvoX xml rommetadata files.)
- Now added the CAN OBDII data.xml file
- Now realtime graphing stays in Sync when ticking more dataitems.
Future Map Tracer suggestion improvements:
- Allow the map tracer to only display the selected range on the Line Graph.
- Allow support for Evo5 roms
If you wish to add to this improvements list, let me know.
#770
Hamish thanks... I used beta19 last night and everything logged terrific for my friends JDM Evo X. I couldn't get it to work around when I was trying beta14 or so.
I have a question though.. could you give me an idea of what version to choose at this point? Also are all the 2.7 betas a full installer deal or are they a "unzip in a 2.7 installed folder"? Also, where can I find 2.6 final?
Thanks much. Loving the sampling rate with the Evo X + mode23. Thanks SiC as well for helping me with the mode23 addresses for the 5260016 rom which btw is not listed on the first post of this thread. Maybe it should be put there?
I have a question though.. could you give me an idea of what version to choose at this point? Also are all the 2.7 betas a full installer deal or are they a "unzip in a 2.7 installed folder"? Also, where can I find 2.6 final?
Thanks much. Loving the sampling rate with the Evo X + mode23. Thanks SiC as well for helping me with the mode23 addresses for the 5260016 rom which btw is not listed on the first post of this thread. Maybe it should be put there?
#776
The MODE 23 EVOXLogger w/ Wideband based off Tephra's is alive. I'd like to thank Tephra for sharing the power of his source :]
It's not a straight C program anymore (now C++/CLI ), so it requires the .NET framework version 3.5 SP1
Wideband Currently Supported
"PLX" <-- definitely works (PLX SM-AFR)
"LM1" <-- needs testing.. (Innovate LM-1)
"LC1" <-- needs testing.. (Innovate LC-1)
"ZT2" <-- needs testing.. (Zeitronix ZT-2)
"AEM" <-- needs testing.. (AEM UEGO)
Monitors get configured as follows via file "monitors.config"
The wideband stuff like this via file "wb.config"
When you run the "evoxlogger.exe" it automatically creates a log file in the relative "logs" folder..
The autogenerated filename is generated with the following format - example: "EVOXLoggerDataLog-2009_10_01-22_58.csv"
If you run it as such "evoxlogger.exe C:\temp\mylog.csv" then it writes to the file file path passed in..
It's not a straight C program anymore (now C++/CLI ), so it requires the .NET framework version 3.5 SP1
Wideband Currently Supported
"PLX" <-- definitely works (PLX SM-AFR)
"LM1" <-- needs testing.. (Innovate LM-1)
"LC1" <-- needs testing.. (Innovate LC-1)
"ZT2" <-- needs testing.. (Zeitronix ZT-2)
"AEM" <-- needs testing.. (AEM UEGO)
Monitors get configured as follows via file "monitors.config"
Code:
# # Name:Source:HexAddress:ReturnBytes:RPNFormula:Priority # 1) Make sure there are NO SPACES (including @ end) # 2) Make sure your formula is correct - "x" is the value returned from the car. # TPS:OP2:0x8086F9:1:x,32,-,129,*,255,/:1 2ByteRPM:OP2:0x808746:2:x,3.90625,*:1 LoadFuel:OP2:0x80876E:2:x,10,*,32,/:1 LoadMivec:OP2:0x808774:2:x,10,*,32,/:1 TimingAdv:OP2:0x808A07:1:x,20,-:1 KnockSum:OP2:0x808A4B:1:x:1 PSIG:OP2:0x80871A:2:x,4,/,0.19347,*,14.5,-:1 WideBandAF:WB:0x000000:0:x:1
Code:
# # Type:COMPORT:TestMode # PLX:COM4:false
The autogenerated filename is generated with the following format - example: "EVOXLoggerDataLog-2009_10_01-22_58.csv"
If you run it as such "evoxlogger.exe C:\temp\mylog.csv" then it writes to the file file path passed in..
Last edited by funks; Oct 12, 2009 at 11:07 PM.
#778
Account Disabled
iTrader: (8)
Join Date: Sep 2007
Location: Hayward
Posts: 3,366
Likes: 0
Received 0 Likes
on
0 Posts
Tephra,
Anyway you can find mode 23 for Rom ID: 53610010
AUS 09 Lancer Ralliart rom
You can grab it here:
https://www.evolutionm.net/forums/7570511-post263.html
53600010 mode23 XML shows wrong in this rom.
Thanks!
Anyway you can find mode 23 for Rom ID: 53610010
AUS 09 Lancer Ralliart rom
You can grab it here:
https://www.evolutionm.net/forums/7570511-post263.html
53600010 mode23 XML shows wrong in this rom.
Thanks!