Evo X Logging
#1007
Evolving Member
iTrader: (2)
ZT-2 WB install with serial cable
Hello all,
I wanted to install my wb to my RA but was not interested in logging thru the ecu. I'm thinking it is going to be harder to wire it to the ecu.
My question is once I replace the rear o2 sensor with the ZT-2 wb o2 sensor do I just run the wire to the Zeitronix unit or is there more to do. I have a laptop with a serial port currently. I was going to just wire the nb o2 sensor out of the way to make it easier to convert back to stock. I think I read somewhere that I need to turn off the current nb o2 sensor? Is this true, and if so how do I do this? I have ecuflash and evoscan currently. Sorry if the is a noob question. I did do a search for this as well. Please try not to flame. Thanks! Still learning........
I wanted to install my wb to my RA but was not interested in logging thru the ecu. I'm thinking it is going to be harder to wire it to the ecu.
My question is once I replace the rear o2 sensor with the ZT-2 wb o2 sensor do I just run the wire to the Zeitronix unit or is there more to do. I have a laptop with a serial port currently. I was going to just wire the nb o2 sensor out of the way to make it easier to convert back to stock. I think I read somewhere that I need to turn off the current nb o2 sensor? Is this true, and if so how do I do this? I have ecuflash and evoscan currently. Sorry if the is a noob question. I did do a search for this as well. Please try not to flame. Thanks! Still learning........
#1009
Evolving Member
Sorry for the noob questions but can someone tell me what AFR at WOT is considered lean? Also is it suppose to be steady? Mines during cruising on the freeway bounce around from 14.5-15.2ish. And dring WOT, its 11.5-12.5ish (cant confirm this till i break in my clutch, the shop told me this when they tested it after the clutch install).
#1013
Evolving Member
Tephra, Im currently running a Gunzo 91oct map thats tweaked (I run 93oct fuel). Only mods i have are a drop in/turbo inlet. Would AFR in low 12's be ok or is it pushing it? Thanks for the help, i appreciate it!
#1015
Evolving Member
Thanks for the info! Ill be getting a custom tune it seems like haha..when i turn my A/C on it goes richer (13's) then goes lean for a second or two (16's) then back to 15.2-15.3ish
#1017
Evolving Member
As someone else said, now my eyes are burning ... does anyone have the config file for 55580006? (2010 EVOX SE fwiw) No matter which "Select ECU" I choose in EvoScan v2.8.0005 there is something not working right. In most cases my usual indicator is that TPS is showing 88% though in at least one case (I think the 2010 USA RA) I get what appears to be the right answer. The address for that is 2380870D
Also fwiw using Golden's ecuflash xml, the rom inherits 55580005
PS yes it does appear though that I have mode23 logging running correctly.
Also fwiw using Golden's ecuflash xml, the rom inherits 55580005
PS yes it does appear though that I have mode23 logging running correctly.
#1020
Evolved Member
iTrader: (1)
Join Date: Nov 2009
Location: Omaha, NE
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
55580006 is the exact same rom that 2010 MR's use.
The 2010 Evo X / RA setting is correct for logging. So far, all the 2010's (GSR, MR, SE, RA) log the same way and use the same table definitions.
(Note that there may be 1 or 2 "tables" that are not the exact same.)
The 2010 Evo X / RA setting is correct for logging. So far, all the 2010's (GSR, MR, SE, RA) log the same way and use the same table definitions.
(Note that there may be 1 or 2 "tables" that are not the exact same.)
As someone else said, now my eyes are burning ... does anyone have the config file for 55580006? (2010 EVOX SE fwiw) No matter which "Select ECU" I choose in EvoScan v2.8.0005 there is something not working right. In most cases my usual indicator is that TPS is showing 88% though in at least one case (I think the 2010 USA RA) I get what appears to be the right answer. The address for that is 2380870D
Also fwiw using Golden's ecuflash xml, the rom inherits 55580005
PS yes it does appear though that I have mode23 logging running correctly.
Also fwiw using Golden's ecuflash xml, the rom inherits 55580005
PS yes it does appear though that I have mode23 logging running correctly.