Evo X Logging
#1159
I want to write the log mivec
How to find the MUT request ?
"InVVT (target)" LogReference="InVVTtarget" RequestID="23809XXX" Eval="(x-4096)*-0.01953125"
1)InVVT (target)
2)InVVT (actual)
3)ExVVT (target)
4)ExVVT (actual)
How to find the firmware address 23809ХХХ?
How to find the MUT request ?
"InVVT (target)" LogReference="InVVTtarget" RequestID="23809XXX" Eval="(x-4096)*-0.01953125"
1)InVVT (target)
2)InVVT (actual)
3)ExVVT (target)
4)ExVVT (actual)
How to find the firmware address 23809ХХХ?
#1160
I spent the better part of yesterday with the 2 "how to" files trying to get the table definition added to my xml for my ROM type to enable. I did it this way and 10 seconds later... success! Now to start preparing for the next stage.
Last edited by iceberg; Jun 24, 2020 at 02:37 PM. Reason: thoughts
#1161
Hello!
I am new here! I am trying to enable mode23 for my romid 53040007 and I find there the following rows for mode23:
<table name="Mode 23 - IFMode 0x05 -> 0x23 #1" address="7f145" scaling="Mode 23 - IFMode 0x05 -> 0x23 #1"/>
<table name="Mode 23 - IFMode 0x05 -> 0x23 #2" address="8aa59" scaling="Mode 23 - IFMode 0x05 -> 0x23 #2"/>
<table name="Mode 23 - DoMode 0x42 -> 0x52" address="8aa5e" scaling="Mode 23 - DoMode 0x42 -> 0x52"/>
Obviously these are different from your .XML ones for my romid! So my question is: Do I have to overwright them with yours or add yours to my definition .XML?
How do I save the difinition file? Do I need to log in as an admin?
I am new here! I am trying to enable mode23 for my romid 53040007 and I find there the following rows for mode23:
<table name="Mode 23 - IFMode 0x05 -> 0x23 #1" address="7f145" scaling="Mode 23 - IFMode 0x05 -> 0x23 #1"/>
<table name="Mode 23 - IFMode 0x05 -> 0x23 #2" address="8aa59" scaling="Mode 23 - IFMode 0x05 -> 0x23 #2"/>
<table name="Mode 23 - DoMode 0x42 -> 0x52" address="8aa5e" scaling="Mode 23 - DoMode 0x42 -> 0x52"/>
Obviously these are different from your .XML ones for my romid! So my question is: Do I have to overwright them with yours or add yours to my definition .XML?
How do I save the difinition file? Do I need to log in as an admin?
#1162
Evolving Member
I am new here! I am trying to enable mode23 for my romid 53040007 and I find there the following rows for mode23:
<table name="Mode 23 - IFMode 0x05 -> 0x23 #1" address="7f145" scaling="Mode 23 - IFMode 0x05 -> 0x23 #1"/>
<table name="Mode 23 - IFMode 0x05 -> 0x23 #2" address="8aa59" scaling="Mode 23 - IFMode 0x05 -> 0x23 #2"/>
<table name="Mode 23 - DoMode 0x42 -> 0x52" address="8aa5e" scaling="Mode 23 - DoMode 0x42 -> 0x52"/>
<table name="Mode 23 - IFMode 0x05 -> 0x23 #1" address="7f145" scaling="Mode 23 - IFMode 0x05 -> 0x23 #1"/>
<table name="Mode 23 - IFMode 0x05 -> 0x23 #2" address="8aa59" scaling="Mode 23 - IFMode 0x05 -> 0x23 #2"/>
<table name="Mode 23 - DoMode 0x42 -> 0x52" address="8aa5e" scaling="Mode 23 - DoMode 0x42 -> 0x52"/>
So at least you have to edit(overwrite) the mode23 part of texts with correct one.
I suggest instead of editing just the mode23 part, replace all of the contents of your 53040007.xml.(Because other parts of your 53040007.xml might be broken as well.)
HOWTO:
1. Download 53040007.xml from Bryan's site.
2. Replace your ecuflash/rommetadata/mitsubishi/evo/53040007.xml with above xml.
If you like to just replace mode23 part:
1. Download 53040007.xml from Bryan's site.
2. Open the file by a text editor and copy mode23 part of texts.
3. Open your ecuflash/rommetadata/mitsubishi/evo/53040007.xml by a text editor and replace mode23 part with the copied texts and save(overwrite) the xml.
No need to login to something as an administrator.
#1165
Evolving Member
It is normal that mode23 values are hex.
(before edit)
0x05
0x05
0x0042
(after edit)
0x23
0x23
0x0052
For example, if you need to change the value 0042 to 0052,
1. enter '=' key
2. enter 0x0052 to 'lease enter a value or...' diialog. ( Don't forget to enter '0x' before '0052'.)
~~~~~~
3. enter 'enter' key.
(before edit)
0x05
0x05
0x0042
(after edit)
0x23
0x23
0x0052
For example, if you need to change the value 0042 to 0052,
1. enter '=' key
2. enter 0x0052 to 'lease enter a value or...' diialog. ( Don't forget to enter '0x' before '0052'.)
~~~~~~
3. enter 'enter' key.
#1166
Good time. Help turn on mode 23 please. I have a slightly different car (Outlander XL). firmware version 57120006. I found the table MUT, but I can't figure it out with mode 23.
Thank you very much for the early!
Thank you very much for the early!
#1167
I tried several different options, it doesn't work, all requests 23 ****** answer 35.
I have tried many different addresses from the lancer firmware.
Can someone help? The last one I tried like this.
<table name = "Mode 23 - IFMode 0x05 -> 0x23 # 1" category = "Misc" address = "8117b" type = "1D" scaling = "Hex8" />
<table name = "Mode 23 - IFMode 0x05 -> 0x23 # 2" category = "Misc" address = "8c627" type = "1D" scaling = "Hex8" />
<table name = "Mode 23 - DoMode 0x0042 -> 0x0052" category = "Misc" address = "8e256" type = "1D" scaling = "Hex16" />
and
<table name="Mode 23 - DoMode 0x4B -> 0x5B" category="Misc" address="8c62e" type="1D" scaling="Hex16"/>
I have tried many different addresses from the lancer firmware.
Can someone help? The last one I tried like this.
<table name = "Mode 23 - IFMode 0x05 -> 0x23 # 1" category = "Misc" address = "8117b" type = "1D" scaling = "Hex8" />
<table name = "Mode 23 - IFMode 0x05 -> 0x23 # 2" category = "Misc" address = "8c627" type = "1D" scaling = "Hex8" />
<table name = "Mode 23 - DoMode 0x0042 -> 0x0052" category = "Misc" address = "8e256" type = "1D" scaling = "Hex16" />
and
<table name="Mode 23 - DoMode 0x4B -> 0x5B" category="Misc" address="8c62e" type="1D" scaling="Hex16"/>
#1168
So what about the later RA firmwares and enabling mode23? I have a 56940014 ralliart here and the image seems to differ significantly in the first half from 56940007 which is available. What's the best way to work with EvoScan and 56940013/14? I don't see any definitions on the Interwebs for these and supposedly they are improved post recall firmwares that help with SST torque request.
(attached the '14 image to post)
EDIT:
It's been done under this thread: https://www.evolutionm.net/forums/ev...ns-mode23.html
It has been flashed and appears to work (and not brick )
(attached the '14 image to post)
EDIT:
It's been done under this thread: https://www.evolutionm.net/forums/ev...ns-mode23.html
It has been flashed and appears to work (and not brick )
Last edited by bn880; Sep 24, 2021 at 05:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dowser
Evo X Engine Management / Tuning Forums
11
Apr 2, 2019 05:55 AM