Evo X Logging
Jun 5, 2009, 09:27 AM
#106
Evolved Member
iTrader: (1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Try uninstalling ECUFlash and remove all the Tactrix drivers from the Add/Remove Programs in control panel. Reinstall ECUFlash and plug in the OP2 and let the system install the drivers for it. Then try running Mode23 again.
Jun 5, 2009, 12:10 PM
#108
Evolved Member
Join Date: Apr 2009
Location: US
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
It does not integrate wideband a/f meters yet. I think the plan is to integrate this logger's functionality into evoscan so we can do wideband with evoscan (plus the other evoscan features).
Tephra, this logger is working great!! Thanks so much. I'm going to try to log again with speed in mph. I believe this is the right formula:
Speed:0x8087e7:1:x,2,*,0.62137,*:5
Tephra, this logger is working great!! Thanks so much. I'm going to try to log again with speed in mph. I believe this is the right formula:
Speed:0x8087e7:1:x,2,*,0.62137,*:5
Jun 5, 2009, 03:23 PM
#110
Evolved Member
iTrader: (1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
It does not integrate wideband a/f meters yet. I think the plan is to integrate this logger's functionality into evoscan so we can do wideband with evoscan (plus the other evoscan features).
Tephra, this logger is working great!! Thanks so much. I'm going to try to log again with speed in mph. I believe this is the right formula:
Speed:0x8087e7:1:x,2,*,0.62137,*:5
Tephra, this logger is working great!! Thanks so much. I'm going to try to log again with speed in mph. I believe this is the right formula:
Speed:0x8087e7:1:x,2,*,0.62137,*:5
Boost:your mut address:2:x,4,/,0.19347,*,your barometer reading,-,0.0689476,*:1
I believe tephra put in 14.5 for the barometer reading but you should adjust this to your elevation. If you are right around sea level, you'll be at 14.7, etc.
Jun 5, 2009, 04:04 PM
#112
Evolved Member
iTrader: (3)
Join Date: May 2004
Location: GUAM, USA
Posts: 1,102
Likes: 0
Received 0 Likes
on
0 Posts
This if for everyone doing logs right now. What are you using to log A/F? I am about to order one, and was wondering what will work best with Evoscan. I was wanting to get the dashdaq or EvoScan navi display unit. Which one should I order? Thanks!
Jun 5, 2009, 05:29 PM
#113
Evolved Member
iTrader: (1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Not bad for a free mail in tune huh? 
Hitting 280 max load (26.5 psi), spooling about 500RPM quicker than stock, and dropping to 220 load by redline. The power must've increased significantly and the knock is much less than stock (1-2 counts). I'll work with you to bring the knock to 0 if you wish
Hitting 280 max load (26.5 psi), spooling about 500RPM quicker than stock, and dropping to 220 load by redline. The power must've increased significantly and the knock is much less than stock (1-2 counts). I'll work with you to bring the knock to 0 if you wish
Jun 5, 2009, 05:35 PM
#114
Evolving Member
Join Date: Jun 2007
Location: New Zealand
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Not bad for a free mail in tune huh?
Hitting 280 max load (26.5 psi), spooling about 500RPM quicker than stock, and dropping to 220 load by redline. The power must've increased significantly and the knock is much less than stock (1-2 counts). I'll work with you to bring the knock to 0 if you wish
Hitting 280 max load (26.5 psi), spooling about 500RPM quicker than stock, and dropping to 220 load by redline. The power must've increased significantly and the knock is much less than stock (1-2 counts). I'll work with you to bring the knock to 0 if you wish
ill have a play with that knock tonight when im finishd with this gt3 is there anyway to get more boost into the higher RPM's or is it maxed out on the stock system?
Jun 5, 2009, 05:52 PM
#116
Evolved Member
iTrader: (1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for jacking the thread
Jun 5, 2009, 06:59 PM
#117
Evolved Member
Join Date: Apr 2009
Location: US
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
That's correct and if you want bar instead of PSI for you boost it's:
Boost:your mut address:2:x,4,/,0.19347,*,your barometer reading,-,0.0689476,*:1
I believe tephra put in 14.5 for the barometer reading but you should adjust this to your elevation. If you are right around sea level, you'll be at 14.7, etc.
Boost:your mut address:2:x,4,/,0.19347,*,your barometer reading,-,0.0689476,*:1
I believe tephra put in 14.5 for the barometer reading but you should adjust this to your elevation. If you are right around sea level, you'll be at 14.7, etc.
