tephra

iTrader: (6)

Not directly.

Wire it into the ECU (rear02) and then you can log it that way.

This is just a stop-gap until EvoScan gets up-to-date.

I've decided to log 2byte RPM - since its more accurate and it doesn't slow anything down... If ppl want the memory address let me know their ROMID

SiC

iTrader: (1)

Count me in, ROMID 52360018, should be the same as your address

tephra

iTrader: (6)

try this:

RPM:0x80873e:2:x,1000,*,256,/:1

SiC

iTrader: (1)

Thanx, I'll test it out

LaXGSR

How about 2 byte rpm for 52680018?

tephra

iTrader: (6)

try RPM:0x808746:2:x,1000,*,256,/:1

tephra

iTrader: (6)

hrmm so I found another ROM with the same Cobb stuff up... So I take it back - cobb.

Where ever this ROM originated (and i have a good idea) they are doing some funky stuff

LaXGSR

Thanks tephra, I'll try this out tonight or tomorrow! So with the revised boost psi formula adjusted for atmospheric pressure, I'm running more boost than I thought was possible. Even my stock map is running higher than I expected. Just to confirm, the 14.5 in the original psi formula should be replaced by local atmospheric pressure?

Bob_tm

Tested on edm Evo with 53040007 rom. Work great!

xbox4414

iTrader: (2)

Running Windows Vista 32bit with SP1....I plug in the OP2, open the program and then Windows says the program stopped working and closes. Any ideas?

MR. Tim

iTrader: (11)

I am missing something here...... My Rom Internal ID is 52680020. It says it inherits 52680015. So i use Tephras 1st config file (config-52680015-52680020,52690019) right?

In ecuflash - what xml do i modify with this data:

<table name="IFMode 0x05 -> 0x23 #1" category="Misc" type="1D" address="0x7f121" scaling="Hex8"/>
<table name="IFMode 0x05 -> 0x23 #2" category="Misc" type="1D" address="0x8ab11" scaling="Hex8"/>
<table name="DoMode 0x42 -> 0x52" category="Misc" type="1D" address="0x8ab16" scaling="Hex16"/>

When i open up the 52680020 xml file, it only has like 18 lines in it, none of which resemble anything like what i am supposed to modify it to look like. Do i modify 52680015 since that is what my rom inherits?

SiC

iTrader: (1)

You don't modify any lines, you just add those lines before the </rom>

MR. Tim

iTrader: (11)

And i add those lines into my 52680020 xml file right?

LaXGSR

I added mine into the 52680015 xml file in ecuflash since that has the "Misc" section in it. That works great for me.

LaXGSR

I've had this problem if I have the log file open in Excel and then try to run the logger. You don't have the log file open do you? Or perhaps the program doesn't have permission to write to the folder that the .exe is in. On Vista, this can happen if you have the .exe under "Program Files" somewhere. Try putting it on the desktop instead as a test. Otherwise, you may also need to run the .exe as administrator.