Virtual Dyno Room-Dyno Simulator
Jun 27, 2009, 08:16 AM
#181
Thanks for the suggestions Chris. I'm really glad you've decided to take the time to mess with my little project especially since I know you use DLL quite regualarly 
I was going to have a filter for the TPS a while ago but then realized that a TONNNN of datalogs people sent had more than one pull recorded in them and/or they couldn't resist the urge to NLTS into 4th for a short bit lol. Both made the logs crazy screwy. This makes users have to crop their pulls themselves a portion of the time. So I decided to have the user do ONE thing themselves, the cropping. Maybe in the future I'll add an 'auto-filter' check box so the users can opt to enabled/disable the auto-search with the TPS column added.
I can edit that, thanks
I will look into columns C and D. What version of OpenOffice or Excel are you running? OpenOffice this next revision will have two separate downloads for Excel and openOffice since they have slight differences which require the coding/visual layouts different.
You have NO idea how hard it is to have 2 logs overlap with the immense amount of data required, plus fit everything on a screen! I think 2 is all I can handle
Its literally requires 2 totally separate simulators to have 2 logs overlap. I think the majority of users will be quite happy that I decide to add the 2nd comparison log for them and call it a day. Maybe down the road when my head stops spinning I can expand it lol.
way ahead of ya!
Just trying to find the different year/gear ratio combo's available for all of the VII's and X's.
Thats a good idea. I will add that as a between the average DJ and average MD
This revision is HUGE. I have dialed things in 10x more than v5.3 plus added a crapload of features (plus I keep adding them with everyone's requests/suggestions) so its taking longer than I first predicted. I REALLY wanna have it done by the end of the weekend but I don't know if I will get the free time without the wife getting neglected.
Thanks for everyones support! Really, it means a lot.
I was going to have a filter for the TPS a while ago but then realized that a TONNNN of datalogs people sent had more than one pull recorded in them and/or they couldn't resist the urge to NLTS into 4th for a short bit lol. Both made the logs crazy screwy. This makes users have to crop their pulls themselves a portion of the time. So I decided to have the user do ONE thing themselves, the cropping. Maybe in the future I'll add an 'auto-filter' check box so the users can opt to enabled/disable the auto-search with the TPS column added.
I can edit that, thanks
I will look into columns C and D. What version of OpenOffice or Excel are you running? OpenOffice this next revision will have two separate downloads for Excel and openOffice since they have slight differences which require the coding/visual layouts different.
You have NO idea how hard it is to have 2 logs overlap with the immense amount of data required, plus fit everything on a screen! I think 2 is all I can handle
Its literally requires 2 totally separate simulators to have 2 logs overlap. I think the majority of users will be quite happy that I decide to add the 2nd comparison log for them and call it a day. Maybe down the road when my head stops spinning I can expand it lol.way ahead of ya!
Just trying to find the different year/gear ratio combo's available for all of the VII's and X's.This revision is HUGE. I have dialed things in 10x more than v5.3 plus added a crapload of features (plus I keep adding them with everyone's requests/suggestions) so its taking longer than I first predicted. I REALLY wanna have it done by the end of the weekend but I don't know if I will get the free time without the wife getting neglected.
Thanks for everyones support! Really, it means a lot.
Last edited by Jack_of_Trades; Jun 27, 2009 at 08:29 AM.
Jun 27, 2009, 06:30 PM
#182
Well, I really can't do this because when you copy a 'column' from another page (your datalog) it also copies the column width so even if I resized my column width on the 'Data Entry' page, the second you paste your LogEntrySeconds row into it the column width will change to whatever it was in your datalog. Maybe I can find a way around it later but for now I just can't find a way how while still allowing users to paste the entire column quickly.
Jun 28, 2009, 04:29 AM
#185
Evolved Member
iTrader: (1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Just in case you need the gear ratios for the EvoX here it is:
GSR (5 Speed MT)
2.857
1.950
1.444
1.096
0.761
Final
4.687
MR (6 Speed SST)
3.655
2.368
1.754
1.322
1.008
0.775
Final
4.062
GSR (5 Speed MT)
2.857
1.950
1.444
1.096
0.761
Final
4.687
MR (6 Speed SST)
3.655
2.368
1.754
1.322
1.008
0.775
Final
4.062
Jun 28, 2009, 09:33 AM
#190
Not a clue. In order to know for SURE, I would need someones datalogs from their dyno session on a dyno dynamics dyno over there. I'd also need to know the vehicle weight entered into the dyno software, the tire size of the vehicle tested and the UNcorrected hp/tq results from that pull.
As time goes by and I acquire more and more data from members/tuner shops I will be able to add more dyno types and even specific shop dyno's to the list. Do some searching and see where dyno dynamics results usually compare to dynojets and mustang dynos to get an idea.
If its somewhere in the middle, just look at the correction factor used by both dyno types and manually enter in your own correction value somewhere in the middle. Just enter in your own correction value in the 'USER Correction #1' box and select 'USER Correction #1' from the drop-down list located in the 'DYNO Correction Factor' box.
As time goes by and I acquire more and more data from members/tuner shops I will be able to add more dyno types and even specific shop dyno's to the list. Do some searching and see where dyno dynamics results usually compare to dynojets and mustang dynos to get an idea.
If its somewhere in the middle, just look at the correction factor used by both dyno types and manually enter in your own correction value somewhere in the middle. Just enter in your own correction value in the 'USER Correction #1' box and select 'USER Correction #1' from the drop-down list located in the 'DYNO Correction Factor' box.
Jun 28, 2009, 03:27 PM
#191
v5.4 now supports all Evo 7 platforms (even the rare 5-speed automatic GT-A version!) and the Evo 10's Just need to make the visual updates for the OpenOffice version and it will be launched very shortly!
Again, as always, this will need to be put through its paces by all of you to help me find any errors I may have overlooked in the coding.
Just need to make the visual updates for the OpenOffice version and it will be launched very shortly!Again, as always, this will need to be put through its paces by all of you to help me find any errors I may have overlooked in the coding.
Jun 28, 2009, 07:29 PM
#194
All set guys. One file SHOULD work for any platform though OpenOffice seems to not allow me to hide unused columns to the right when i save it. Other than that it seems to be working.
I will be adding this link to the first page and updating the first post with the new info tomorrow.
The directions link in the program isn't done yet, hopefully tomorrow.
CLICK HERE TO DOWNLOAD 'VIRTUAL DYNO ROOM v5.4'
.
I will be adding this link to the first page and updating the first post with the new info tomorrow.
The directions link in the program isn't done yet, hopefully tomorrow.
CLICK HERE TO DOWNLOAD 'VIRTUAL DYNO ROOM v5.4'
.
Last edited by Jack_of_Trades; Jun 28, 2009 at 08:04 PM.
