Patch: Force OBD Inspection Pass (acamus, mrfred)
#427
EvoM Community Team Leader
iTrader: (60)
when i change the upper set to what some people have posted here, some of the bottom ones change and vise versa.
and when they change, a couple of the hex codes change to ones that aren't even shown on any of the tables. it's f'ed up.
i've decided to put car back to stock and smog legit. i have all the sensors hooked up and the cat on the car anyway, so i don't even NEED to force pass anything. all i have to do is swap injectors and map sensor.
i only did it this way because it was supposed to be easier LOL.
and when they change, a couple of the hex codes change to ones that aren't even shown on any of the tables. it's f'ed up.
i've decided to put car back to stock and smog legit. i have all the sensors hooked up and the cat on the car anyway, so i don't even NEED to force pass anything. all i have to do is swap injectors and map sensor.
i only did it this way because it was supposed to be easier LOL.
#429
EvoM Community Team Leader
iTrader: (60)
update:
it turns out my EGR was turned off @ bit 9. fixed. but now i have a p0403. it never ends LOL
my map and injectors were keeping me from putting in a stock ROM to pass smog. i figured i could make some changes to pass my current tune and be done. i was sorely mistaken.
but.. at least now the smog shop is seeing the EGR, that's a start. now i just gotta figure out why i have a code. everything is hooked up. i'm reading lot of people that replace the entire evap system and still get the p0403. it does not look promising LOL
it turns out my EGR was turned off @ bit 9. fixed. but now i have a p0403. it never ends LOL
my map and injectors were keeping me from putting in a stock ROM to pass smog. i figured i could make some changes to pass my current tune and be done. i was sorely mistaken.
but.. at least now the smog shop is seeing the EGR, that's a start. now i just gotta figure out why i have a code. everything is hooked up. i'm reading lot of people that replace the entire evap system and still get the p0403. it does not look promising LOL
#431
EvoM Community Team Leader
iTrader: (60)
passed. jesus.
turns out my EGR was turned off in periphery bit 9, so i fixed that. i then had a p0403 code, so then changed bit 15. finally passed. what a pain in the ***.
and why do i have so many availability and completion patches? i have no idea. here is my setting that passed today. i also have all sensors hooked up (i never remove them) with an OMNI map sensor and grimspeed boost solenoid.
turns out my EGR was turned off in periphery bit 9, so i fixed that. i then had a p0403 code, so then changed bit 15. finally passed. what a pain in the ***.
and why do i have so many availability and completion patches? i have no idea. here is my setting that passed today. i also have all sensors hooked up (i never remove them) with an OMNI map sensor and grimspeed boost solenoid.
#434
EvoM Community Team Leader
iTrader: (60)
To be honest, I don't understand the questions. I'm not very good at the more in-depth ecuflash stuff. I was busy and stressed, trying to get the car to pass, so I wasn't able to take the time to look into what you were saying. My apologies. The only part that made sense was "are you turning the EGR off?". That's what chucked for me, so thank you.
#435
EvoM Community Team Leader
iTrader: (60)
I set my top set of availability/completion settings to what people here used...didn't work.
So then I set the bottom ones to what people here used. Didn't work. My tuner sent me the ROM all his guys use. Didn't work. So, I was pretty much on my own.