Notices
ECU Flash

TephraMod V7

Thread Tools
 
Search this Thread
 
Old May 4, 2010 | 05:55 PM
  #1756  
tephra's Avatar
Thread Starter
EvoM Guru
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 66
From: Melbourne, Australia
what is MUT43?

does your RPM_SPEED_RATIO_AVERAGE log properly? ie ~2000 for 1st.... ~25 for 6th?
Old May 4, 2010 | 05:58 PM
  #1757  
tnt1106's Avatar
Evolving Member
 
Joined: May 2008
Posts: 346
Likes: 0
From: Dallas, TX
Originally Posted by tephra
what is MUT43?

does your RPM_SPEED_RATIO_AVERAGE log properly? ie ~2000 for 1st.... ~25 for 6th?
MUT 43 = 8449

And yes rpm/speed seems to be correct, jsut its not using the gear it should for that value (ie 54 rpm/spd= 3rd gear)
Old May 4, 2010 | 06:00 PM
  #1758  
tephra's Avatar
Thread Starter
EvoM Guru
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 66
From: Melbourne, Australia
what does your "RPM/Speed to Gear" table look like?

It's in the TephraMOD-V7 category..
Old May 4, 2010 | 06:02 PM
  #1759  
tnt1106's Avatar
Evolving Member
 
Joined: May 2008
Posts: 346
Likes: 0
From: Dallas, TX
Originally Posted by tephra
what does your "RPM/Speed to Gear" table look like?

It's in the TephraMOD-V7 category..

RPM/SPD Gear
3 6
28 5
41 4
54 3
73 2
104 1
1802 0

(same settings used in V6 with gear based and worked great)
Old May 4, 2010 | 06:03 PM
  #1760  
tephra's Avatar
Thread Starter
EvoM Guru
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 66
From: Melbourne, Australia
do you have a 5 speed box?

email me your ROM... the code in the stock V7 ROM looks like it should work correctly...
Old May 4, 2010 | 06:05 PM
  #1761  
tnt1106's Avatar
Evolving Member
 
Joined: May 2008
Posts: 346
Likes: 0
From: Dallas, TX
Originally Posted by tephra
do you have a 5 speed box?

email me your ROM... the code in the stock V7 ROM looks like it should work correctly...
Yes I do have 5 speed. Email on way. Thank you.
Old May 4, 2010 | 06:12 PM
  #1762  
tephra's Avatar
Thread Starter
EvoM Guru
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 66
From: Melbourne, Australia
check your scaling on the gear table... particularily the RPMPerKPH..

are you doing the calculation in miles per hour or kph?
Old May 5, 2010 | 06:23 AM
  #1763  
tnt1106's Avatar
Evolving Member
 
Joined: May 2008
Posts: 346
Likes: 0
From: Dallas, TX
Originally Posted by tephra
check your scaling on the gear table... particularily the RPMPerKPH..

are you doing the calculation in miles per hour or kph?
ECUflash is set rpm/ mph

evoscan is rpm/ kph.

so even if evoscan logged it wrong wouldn't it still function correctly in the rom?

EDIT: I see where the error is Thank you Dave! (scaling was RPMperMPH)

(Is the the proper scaling for "Gear" side (right column) unit8 (scaling for my V6 rom) or RPMperMPH Gear? (scaling in current rom)

Last edited by tnt1106; May 5, 2010 at 06:30 AM.
Old May 5, 2010 | 06:25 AM
  #1764  
smithrcing17's Avatar
Evolving Member
iTrader: (13)
 
Joined: Sep 2009
Posts: 153
Likes: 0
From: PA
i love my tephra =]
Old May 5, 2010 | 06:28 AM
  #1765  
tephra's Avatar
Thread Starter
EvoM Guru
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 66
From: Melbourne, Australia
both scalings need to match - otherwise your inputting wrong data...
Old May 5, 2010 | 08:01 AM
  #1766  
tnt1106's Avatar
Evolving Member
 
Joined: May 2008
Posts: 346
Likes: 0
From: Dallas, TX
Originally Posted by tephra
both scalings need to match - otherwise your inputting wrong data...


Thought so. Thank you as always Tephra! otw
Old May 6, 2010 | 12:27 PM
  #1767  
VGergo's Avatar
Evolved Member
iTrader: (3)
 
Joined: Nov 2005
Posts: 566
Likes: 1
From: Hungary
hello

If i'm just flash on the "Option 2 94170715 (v7 + Mods Omni 4 Bar MAP)" without any map copy than my evo will run on the stock boost fuel and ignition map ?
Old May 6, 2010 | 05:26 PM
  #1768  
widge's Avatar
Evolving Member
 
Joined: Mar 2010
Posts: 478
Likes: 1
From: Australia
Hey Guys,

I want to flash 96530706 to my E8 but its a 5 speed will this be ok?
Old May 6, 2010 | 06:52 PM
  #1769  
darkmitsu's Avatar
Evolving Member
iTrader: (1)
 
Joined: Feb 2008
Posts: 287
Likes: 1
From: Wendell, NC
hey guys when running v7 how do you disable the knock sensor , because i'm running a 4g64 on speed density and the 4g64 I have does not have a knock sensor on it , and I dont plan on installing one... I read somewhere that periphry 0 bit 7 is the one you change but it listed as something else , in the 965xxxxxxx rom...

Last edited by darkmitsu; May 7, 2010 at 10:01 PM.
Old May 9, 2010 | 05:38 AM
  #1770  
And's Avatar
And
Evolving Member
 
Joined: Dec 2005
Posts: 414
Likes: 0
From: Bristol, England
SORT THIS NOW is there an error in the XML files for the 96531706 roms? as I've down loaded the rom fresh and the SD RPM VE data looks very odd, here is an image of what i'm on about


the address values are MAP 337C and rpm 65f6


thanks
Andy

Last edited by And; May 9, 2010 at 07:07 AM.


Quick Reply: TephraMod V7



All times are GMT -7. The time now is 08:16 AM.