fine and smooth..)

 

PM me your email, I was messing about with that ROM eariler.

Oh, and I have donated for 9055, so waiting on that.................

 

oh and letting it use the fuel temp as your IAT works fine too

 

Me too! Man, the money was worth it just from using V5.10 90550001.
I think more E7 men need to step up and donate though. The V7 should bread some new life into my old E7.

 

The ISCV Demand addresses in 94170715-v7.xml appear to be incorrect. Can someone confirm? Are they correct or not?

 

Me too man donated something.

 

Hello

I have to 2 Evo 9 maybe European Ecu.

The first one ID is 88840013. Can I upload on it the Tephra V7 88590715 ?

The second one can not open have no XML.. Maybe someone coud ? I would need the immobilizier code from it. and the same question can upgrade it with V7 88590715 ?

the rom what i can not open

Thanks a lot !

 

Has the jdm map settings changed? The setting for roms used on usdm evo9 does not match what was originally posted in other threads? I am using 88590715 but when I try to load 88591715 the car runs rich and back fires heavily when the throttle is pressed. AFR reads 10-11. Anyone have any ideas.

 

is it possible to change the order in which the tables appear in ecuflash for this rom? i do not use the alt maps and dont want to scroll all the way halfway down or minimize the tables just to get to the main maps

 

I have EDM EvoIX that initially ran 88840016. Few kmiles ago I uploaded it with Tephra v7 ROM 88580714 and it works like a champ. From wmat I know it is correct Tephra ROM for EDM Evos (88590715 is not the correct one).

As for the ROM that you cannot open, it appears to have ID 88580015, for which I have no definition file. Maybe other more knowledgeable users can help you with definition file or suggest suitable definition file from other ROM.

 

indeed, its 88580015
should be easily downgradable to 88580014, and therefore to 88580714

immo hex is 0067

 

Hello, Thank you for the immo code. So I have to upload stock 88580014 rom than the tephra v7 88580714 ?
Can we run with psi based boost control on the 88580714 ?

VD : can you log boost in Evoscan just select JDM map request 38 ?

 

To running on the Tephra V7 88590715 in the EDM Evo 9 the only way change the Ecu from an USDM Evo 9 one and check the harness pin out ?

 

yes we can, i posted relevant tables in some of the topics, search is your friend

 

After I installed OmniPower MAP sensor I can easily log boost with requesst 38 (stock EDM Evos have no MAP sensor)

This is for you - https://www.evolutionm.net/forums/ec...te-2j1-wb.html