TephraMod V7
#196
#198
Thread Starter
EvoM Guru
iTrader: (6)
Joined: Feb 2007
Posts: 9,486
Likes: 66
From: Melbourne, Australia
AFAIK the MAP sensor is purely used for emissions.
96530006 doesn't care about emisions so it doesn't come with a MAP sensor NOR any scaling tables to "convert" the signal into something the ECU can understand.
96530006 doesn't care about emisions so it doesn't come with a MAP sensor NOR any scaling tables to "convert" the signal into something the ECU can understand.
#199
Yeah, we're all on the same page about that now. The problem is with the scalings for the BLEL and BEC when used with PSI based boost control. They need to be scaled for whichever map sensor being used so the numbers in the tables match the actual PSI levels read by the map sensor. All we need to do is have those tables reference the MAP sensor signal rather than LOAD.
#201
I dont want to rush in any way, but is there an ETA on the excel sheet to convert to the big map or did I miss it? Donation sent.
And for crying out loud people, take the time to READ THE ENTIRE FIRST 2 POSTS. Half the posts are "awaiting" a rom that is not coming. They're universal for USDM cars.
And for crying out loud people, take the time to READ THE ENTIRE FIRST 2 POSTS. Half the posts are "awaiting" a rom that is not coming. They're universal for USDM cars.
Last edited by colonelfox; Oct 12, 2009 at 04:24 PM.
#204
OK, I have DMA/livemapping ported over to the V7 final - bigmap for 96530706. I just need some time to test it out and if everything is working OK, I will post up the instructions.
I don't think too many people use DMA/livemapping, but hopefully I can test before the weekend is here.
Eric
I don't think too many people use DMA/livemapping, but hopefully I can test before the weekend is here.
Eric
#206
The only released ROM is universal to Evo VIII only. v7 for IX has not been released yet, and everyone who's waiting is waiting for 88590015 (IX) or a slight variation.
Last edited by recompile; Oct 12, 2009 at 08:34 PM.
#207
If you are interested in setting you car up like mine in my video, here is the post I made about what I have in order to get this result:
https://www.evolutionm.net/forums/7171893-post961.html
https://www.evolutionm.net/forums/7171893-post961.html
Or is neccesary one patch in ecuflash with one instruccion(offset, etc)?
Other question... Km/h = 8 and % to 95, and stationary rev limit to 5000? or 7600?
Thanks Phemen!
#208
Good point, it may be helpful for tephra to make a notation near the ROM ID list so people know the deal.
#209
I see this post. Ok, all -20º and 10.5AFR, but my rom v5 limited to -10º (log with evoscan), with v7 is possible retard ign to -20º?
Or is neccesary one patch in ecuflash with one instruccion(offset, etc)?
Other question... Km/h = 8 and % to 95, and stationary rev limit to 5000? or 7600?
Thanks Phemen!
Or is neccesary one patch in ecuflash with one instruccion(offset, etc)?
Other question... Km/h = 8 and % to 95, and stationary rev limit to 5000? or 7600?
Thanks Phemen!
I would say to set your stationary rev limit to whatever your car launches good at. The way to find out is to do some launch tests and see if it bogs or not.
#210
My post mentions it, I put that up the first day. Doesn't matter just wanted to point out that people don't really read everything even though you make it bold and red in color!