TephraMod V7
#2206
#2209
Newbie Q's
I'm trying to flash the V7 Tephra:
EDM/JDM/USDM 96530006 (Tested on all years of EDM/JDM/USDM EVO8's)
Option 1 96530706 (v7) Set Immob. HEX to 0x0040 (check to make sure your old ROM was the same)
to my Evolution 8 (which I think is a EDM) came with definition 97470001
The problem is that is doesn't turns on, I think is a immobilizer problem, so:
How do I check the Hex code of the original definition?
I changed the immobilizer code into the Tephra V7 rom, put the same number my definition has, INTI code is the same, I used the Hex it says is for 2005 EDM cars, and nothing
what else can I do? I want to run the Tephra mods on the car
Thanks for your reply
EDM/JDM/USDM 96530006 (Tested on all years of EDM/JDM/USDM EVO8's)
Option 1 96530706 (v7) Set Immob. HEX to 0x0040 (check to make sure your old ROM was the same)
to my Evolution 8 (which I think is a EDM) came with definition 97470001
The problem is that is doesn't turns on, I think is a immobilizer problem, so:
How do I check the Hex code of the original definition?
I changed the immobilizer code into the Tephra V7 rom, put the same number my definition has, INTI code is the same, I used the Hex it says is for 2005 EDM cars, and nothing
what else can I do? I want to run the Tephra mods on the car
Thanks for your reply
#2210
I'm trying to flash the V7 Tephra:
EDM/JDM/USDM 96530006 (Tested on all years of EDM/JDM/USDM EVO8's)
Option 1 96530706 (v7) Set Immob. HEX to 0x0040 (check to make sure your old ROM was the same)
to my Evolution 8 (which I think is a EDM) came with definition 97470001
The problem is that is doesn't turns on, I think is a immobilizer problem, so:
How do I check the Hex code of the original definition?
I changed the immobilizer code into the Tephra V7 rom, put the same number my definition has, INTI code is the same, I used the Hex it says is for 2005 EDM cars, and nothing
what else can I do? I want to run the Tephra mods on the car
Thanks for your reply
EDM/JDM/USDM 96530006 (Tested on all years of EDM/JDM/USDM EVO8's)
Option 1 96530706 (v7) Set Immob. HEX to 0x0040 (check to make sure your old ROM was the same)
to my Evolution 8 (which I think is a EDM) came with definition 97470001
The problem is that is doesn't turns on, I think is a immobilizer problem, so:
How do I check the Hex code of the original definition?
I changed the immobilizer code into the Tephra V7 rom, put the same number my definition has, INTI code is the same, I used the Hex it says is for 2005 EDM cars, and nothing
what else can I do? I want to run the Tephra mods on the car
Thanks for your reply
#2212
I have the original ROM, where or how do I look for the Hex in it?
I used 0x when typing.
The car cranks but doesn't start, I'm pretty sure is immobilizer
Thanks
#2215
#2216
Also set the immobilizer to the same as you old ROM, if the car has no Mitsubishi fitted immobilizer set this to 0xFFFF. You may need to try the other immobilizer hex codes.
#2218