I found that the stationary rev limit didn't work with my car on 96530706 without a code patch. I think ziad perhaps had posted the patch on another thread. I *thought* that was for the 3-plug ECUs though I could be wrong.

 

donation sent for 96260009

Thanks

Taylor OBrien

 

I think this ECU program is awesome

 

I'm trying to switch over to using Ecuflash 1.43.3150 so that I can do standalone data logging but I'm having some trouble with it reading the V7 version of 94170715. Whenever I open a ROM and try to scroll down the list of tables I get an error message once it gets to here:

<table name="== EDIT THE TABLES BELOW FOR LOAD OR PSI BOOST TARGETING ==" category="Global Boost Control

'TYPE' (Choose LOAD or PSI Targeted Boost Control)" address="0" type="1D"/>

All of the tables above this show and work fine. As soon as I scroll down to these tables it never makes it past this line and then it gives me an error message and ECuflash closes out. Anybody else have trouble with this and know how to fix it? FWIW- The same ROMs work fine with Ecuflash 1.42.

 

remove the address="0" from the line and is should work

 

Wow! Awesomeness!!! I knew it had to be something simple. Thanks a lot man!

 

anything out yet for 8857?

 

I'm using the 96530706 in an evo 5 with evo 8 ecu, all swapped with no problems, in the begining the launch controller wasn't working and I figured it was because of the clutch switch, I've installed a clutch switch from an evo and now it works but the NLTS wont work... Anyone have clue?

 

Where can I find the most up to date definitions for:

evo7base_20081101.xml
96530006.xml
TephraMOD-96530706-v7.xml

I'm using Version 1.42.2595

thanks

 

http://code.google.com/p/ecurom/sour...tsubishi%2Fevo

 

www.evoscan.com/roms/mitsubishi

 

donation sent.

 

so many pages.. would anyone happen to remember who it is that sells the cables that connect to the serial out from our widebands, and is built nice and neat into a serial port? i bought one from a member here for about $12.. but i can't remember who. i already have my serial > usb cable.. i'm just missing this ONE piece. anyone?

 

if you're referring to the AEM Uego data logging cable this is what you need http://www.mellonracing.com/index.ph...roducts_id=467

 

a bit pricey, but when in a bind.. assuming that works with any serial-out wideband? i have the Innovative controller/gauge that i'm installing soon. sorry if off topic, i can take it to PMs. but i'm thinking other people will be looking for the same stuff while tuning/logging V7.