TephraMod V7
#2416
I found that the stationary rev limit didn't work with my car on 96530706 without a code patch. I think ziad perhaps had posted the patch on another thread. I *thought* that was for the 3-plug ECUs though I could be wrong.
#2419
I'm trying to switch over to using Ecuflash 1.43.3150 so that I can do standalone data logging but I'm having some trouble with it reading the V7 version of 94170715. Whenever I open a ROM and try to scroll down the list of tables I get an error message once it gets to here:
<table name="== EDIT THE TABLES BELOW FOR LOAD OR PSI BOOST TARGETING ==" category="Global Boost Control
'TYPE' (Choose LOAD or PSI Targeted Boost Control)" address="0" type="1D"/>
All of the tables above this show and work fine. As soon as I scroll down to these tables it never makes it past this line and then it gives me an error message and ECuflash closes out. Anybody else have trouble with this and know how to fix it? FWIW- The same ROMs work fine with Ecuflash 1.42.
<table name="== EDIT THE TABLES BELOW FOR LOAD OR PSI BOOST TARGETING ==" category="Global Boost Control
'TYPE' (Choose LOAD or PSI Targeted Boost Control)" address="0" type="1D"/>
All of the tables above this show and work fine. As soon as I scroll down to these tables it never makes it past this line and then it gives me an error message and ECuflash closes out. Anybody else have trouble with this and know how to fix it? FWIW- The same ROMs work fine with Ecuflash 1.42.
#2423
I'm using the 96530706 in an evo 5 with evo 8 ecu, all swapped with no problems, in the begining the launch controller wasn't working and I figured it was because of the clutch switch, I've installed a clutch switch from an evo and now it works but the NLTS wont work... Anyone have clue?
#2425
#2426
#2428
so many pages.. would anyone happen to remember who it is that sells the cables that connect to the serial out from our widebands, and is built nice and neat into a serial port? i bought one from a member here for about $12.. but i can't remember who. i already have my serial > usb cable.. i'm just missing this ONE piece. anyone?
#2429
Account Disabled
iTrader: (38)
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
so many pages.. would anyone happen to remember who it is that sells the cables that connect to the serial out from our widebands, and is built nice and neat into a serial port? i bought one from a member here for about $12.. but i can't remember who. i already have my serial > usb cable.. i'm just missing this ONE piece. anyone?
#2430
if you're referring to the AEM Uego data logging cable this is what you need http://www.mellonracing.com/index.ph...roducts_id=467