TephraMod V7
#2686
Not sure I can see those tables, will check later when I get the laptop.
I did notice the injector latencies were different between roms...
What about swapping to 88580714?
ISCV idle tables
I did notice the injector latencies were different between roms...
What about swapping to 88580714?
ISCV idle tables
Last edited by rsvRob; Jul 31, 2012 at 08:59 AM.
#2688
The very first page has an evo 8 SD tune (which is what you're looking for to run without the MAF). Read the 2nd post of the topic, and under roms for the evo8, look at option 5, that should be the perfect one for you.
#2689
hey guys, have few questions about NLTS
can anyone explain the functions of NLTS load and speed thresholds ?
why they say speed/load must be UNDER this values to activate nlts. and there are 30/150 in these tables accordingly
shouldn't there be stated 'ABOVE' in these tables or I have some faulty defination file ? using 96530706
can anyone explain the functions of NLTS load and speed thresholds ?
why they say speed/load must be UNDER this values to activate nlts. and there are 30/150 in these tables accordingly
shouldn't there be stated 'ABOVE' in these tables or I have some faulty defination file ? using 96530706
#2690
hey guys, have few questions about NLTS
can anyone explain the functions of NLTS load and speed thresholds ?
why they say speed/load must be UNDER this values to activate nlts. and there are 30/150 in these tables accordingly
shouldn't there be stated 'ABOVE' in these tables or I have some faulty defination file ? using 96530706
can anyone explain the functions of NLTS load and speed thresholds ?
why they say speed/load must be UNDER this values to activate nlts. and there are 30/150 in these tables accordingly
shouldn't there be stated 'ABOVE' in these tables or I have some faulty defination file ? using 96530706
#2692
Is there any way to change the inherit rom? I've had this happen a couple times where I'll tune an Evo on Tephra, then when I go back to open the rom later and the Tephra options are no long there and it's inherit rom is the evobase rom and not Tephra. It doesn't happen all the time, so I'm not sure what's going on. Anyone else have this happen?
Thanks!
~Chris@MooreAutomotive
Thanks!
~Chris@MooreAutomotive
#2694
Question about flashing Tephra roms....
I have seen on some posts that some versions of ECUflash cause problems with flashing these roms. I have been using Evoscan v2.8 to flash my current rom. Will there be any problems in flashing a Tephra rom with Evoscan?
Thank you!
I have seen on some posts that some versions of ECUflash cause problems with flashing these roms. I have been using Evoscan v2.8 to flash my current rom. Will there be any problems in flashing a Tephra rom with Evoscan?
Thank you!
#2696
#2698
open the XML in notepad (or similar), about 10ish lines down you will see the <inherit> code. You can adjust the inherit there. type the filename (without '.xml') that you wnat to inherit.
though if you are saying it doesnt happen all the time, i would try reinstall the program.
cheers
though if you are saying it doesnt happen all the time, i would try reinstall the program.
cheers
#2699
I must say I very much love this rom mod. Car feels smoother and with all the resolution in the big maps it's a lot easier to tune the transitions, especially tip-in.
Thank you to all the EvoM elite, especially Tephra.
Thank you to all the EvoM elite, especially Tephra.