TephraMod V7
#3301
Hi Guys,
im planning to switch my Evo 5 ecu with Ceddy features to a Evo 7 or 8 ecu with Tephra features.
Can someone kindly advise me which Ecu (7 or 8) should i go for and which Tephra version is the latest for the both Ecu's?
Lastly, is this an Evo 8 USDM ecu and can it be flash?
Thanks
im planning to switch my Evo 5 ecu with Ceddy features to a Evo 7 or 8 ecu with Tephra features.
Can someone kindly advise me which Ecu (7 or 8) should i go for and which Tephra version is the latest for the both Ecu's?
Lastly, is this an Evo 8 USDM ecu and can it be flash?
Thanks
Last edited by jameswwt; Feb 5, 2016 at 02:36 AM.
#3302
Rear O2 heater circuit simulator
First off I have seen a few posts/threads with information on this but for some reason what is mentioned in those doesn't help me with my issue.
I have been trying to get rid of P0141 - rear o2 heater circuit dtc ,
Originally the ECU ID was 88840016 so I used 88580714 tephramod v7 map
These are the steps I took
1. Turned on Tephramod "rear o2 simulator"
2. cleared DTC's - on second startup p0141 came again
3. Turned off FAA bit 2 - cleared DTC's - after 15-20 min of running ECU threw p0125
4. Turned on FAA bit 2 - cleared DTC's - p0125 was not seen but on second startup p0141 cam on again
Am I missing something or shoud it be enought to turn on Tephramod - rear o2 simulator to get rid of p0141 ?
Or should I just mechanically bluff the heater circuit with resistors.
Any help would be greatly appreciated
regards
Gudmundur
I have been trying to get rid of P0141 - rear o2 heater circuit dtc ,
Originally the ECU ID was 88840016 so I used 88580714 tephramod v7 map
These are the steps I took
1. Turned on Tephramod "rear o2 simulator"
2. cleared DTC's - on second startup p0141 came again
3. Turned off FAA bit 2 - cleared DTC's - after 15-20 min of running ECU threw p0125
4. Turned on FAA bit 2 - cleared DTC's - p0125 was not seen but on second startup p0141 cam on again
Am I missing something or shoud it be enought to turn on Tephramod - rear o2 simulator to get rid of p0141 ?
Or should I just mechanically bluff the heater circuit with resistors.
Any help would be greatly appreciated
regards
Gudmundur
#3303
Hi Guys,
im planning to switch my Evo 5 ecu with Ceddy features to a Evo 7 or 8 ecu with Tephra features.
Can someone kindly advise me which Ecu (7 or 8) should i go for and which Tephra version is the latest for the both Ecu's?
Lastly, is this an Evo 8 USDM ecu and can it be flash?
Thanks
im planning to switch my Evo 5 ecu with Ceddy features to a Evo 7 or 8 ecu with Tephra features.
Can someone kindly advise me which Ecu (7 or 8) should i go for and which Tephra version is the latest for the both Ecu's?
Lastly, is this an Evo 8 USDM ecu and can it be flash?
Thanks
Thanks
Last edited by jameswwt; Feb 8, 2016 at 03:20 AM.
#3304
Hi Guys,
im looking to buy an Evo 8 USDM ECU flashed with latest Tephra V7 feature with Immobilizer deactivated.
Preferred year 2005 onward Ecu and willing to freight to Malaysia.
Thanks
James
im looking to buy an Evo 8 USDM ECU flashed with latest Tephra V7 feature with Immobilizer deactivated.
Preferred year 2005 onward Ecu and willing to freight to Malaysia.
Thanks
James
#3306
#3310
Hi, can anyone here advise the pinout for Jdm Evo 8 Ecu to Evo 6? Is it same as Usdm pinout?
On the SD rom which wires should i tap for the Map & IAT sensor as im currently running on Ceddy with SD feature.
Lastly how to deactivate the Immobilizer on the 8 ecu?
Thanks
On the SD rom which wires should i tap for the Map & IAT sensor as im currently running on Ceddy with SD feature.
Lastly how to deactivate the Immobilizer on the 8 ecu?
Thanks
Last edited by jameswwt; Feb 13, 2016 at 04:15 PM.
#3313