TephraMod V7
#751
The thing that bothers me is the map sensor logs correctly in Evoscan, but for some reason it just can't equate it to where it should be on the fuel/timing maps. For sh**s and giggles tomorrow I'm going to try the stock 3 bar scaling and see what it does.
#752
#753
#754
i can host it and give you the link, if that will help.
there is a STEEP learning curve to all this. i've been trying to figure it out for MONTHS. and now tephra7 has even MORE stuff i have to figure out.
#755
Start with a fresh copy and only move over stuff you need.
#756
which is hard 'cause you can't just cut/paste now that we have the "big" maps. if you do a search, there is a video on how to do the tephramod 5.1. it may help you. it made WAY more sense to me than reading all the threads.
i can host it and give you the link, if that will help.
there is a STEEP learning curve to all this. i've been trying to figure it out for MONTHS. and now tephra7 has even MORE stuff i have to figure out.
i can host it and give you the link, if that will help.
there is a STEEP learning curve to all this. i've been trying to figure it out for MONTHS. and now tephra7 has even MORE stuff i have to figure out.
#757
which is hard 'cause you can't just cut/paste now that we have the "big" maps. if you do a search, there is a video on how to do the tephramod 5.1. it may help you. it made WAY more sense to me than reading all the threads.
i can host it and give you the link, if that will help.
there is a STEEP learning curve to all this. i've been trying to figure it out for MONTHS. and now tephra7 has even MORE stuff i have to figure out.
i can host it and give you the link, if that will help.
there is a STEEP learning curve to all this. i've been trying to figure it out for MONTHS. and now tephra7 has even MORE stuff i have to figure out.
We just bite the bullet and take our time cutting and pasting the small within the large, then edit the last lines wide and tall and copy them down the field all the same, then begin to edit from there. It takes a lot of time, but in the end the bigmaps is a much safer bet with tons of resolution. Any unused portion of the maps are designated with 7.4 fuel and -10 timing to get a better picture on the shape of the curvature the ecu cells will travel. It will have a built in ignition cut this way if the cells are over boosted.
#759
Hey dont know if this has been mentioned, but in the recompile .xml for the 88590715 ROM, the regular(old) timing tables 1,2&3 under "Timing" are still there, when they shouldnt be.
#761
i'll be home late Monday night and will do it for ya on Tues. keep an eye on this thread. i'll post it here. it's Jack of Trade's vid. try a search, in the mean time. it's on this site somewhere.
#762
Bigmaps is a ****. I gather someone has developed an excel file that allows the small maps to transfer over to bigmap data that can be cut and pasted back into bigmaps.
We just bite the bullet and take our time cutting and pasting the small within the large, then edit the last lines wide and tall and copy them down the field all the same, then begin to edit from there. It takes a lot of time, but in the end the bigmaps is a much safer bet with tons of resolution. Any unused portion of the maps are designated with 7.4 fuel and -10 timing to get a better picture on the shape of the curvature the ecu cells will travel. It will have a built in ignition cut this way if the cells are over boosted.
We just bite the bullet and take our time cutting and pasting the small within the large, then edit the last lines wide and tall and copy them down the field all the same, then begin to edit from there. It takes a lot of time, but in the end the bigmaps is a much safer bet with tons of resolution. Any unused portion of the maps are designated with 7.4 fuel and -10 timing to get a better picture on the shape of the curvature the ecu cells will travel. It will have a built in ignition cut this way if the cells are over boosted.
https://www.evolutionm.net/forums/7597112-post3.html
#764
Is there an easy way to transfer over your fuel and timing maps? the scaling is all different so I had to do it almost a cell at a time then interpolate.
Another question, all the maf settings seem different from my stock settings? Then again it says something is already added?
I haven't tested this out yet but if everything is fine how it comes I will.
I have an 8 running Option 2
EDIT: I fail for not reading two posts up.....
Still that only helps with the maps part. What about the MAF
Another question, all the maf settings seem different from my stock settings? Then again it says something is already added?
I haven't tested this out yet but if everything is fine how it comes I will.
I have an 8 running Option 2
EDIT: I fail for not reading two posts up.....
Still that only helps with the maps part. What about the MAF
#765
when i saw those, i was like "WTF?! now i gotta cut/paste all my maps again!". LOL can't we just delete the xml for these maps?
i'll be home late Monday night and will do it for ya on Tues. keep an eye on this thread. i'll post it here. it's Jack of Trade's vid. try a search, in the mean time. it's on this site somewhere.
i'll be home late Monday night and will do it for ya on Tues. keep an eye on this thread. i'll post it here. it's Jack of Trade's vid. try a search, in the mean time. it's on this site somewhere.