TephraMod V7
#1246
been having problem to get the idle to run right. I've been testing 96530706 for a awhile now and have tried to look at it again today. I'm having a bit of issue with idle on an evo 8. Idle by itself is fine but when I drive and come to a stop, it dips all the way down to the point where its gonna die then comes back up. Its weird. I flashed the v5.10 (96420011) map and its fine again.
Phenem - have you encountered this. Am I over looking something. I've checked the idle tables and transferred the map from v5.10 over to .7
Logic, Tephra, JO, fostyTou - any idea whats going one here?
Phenem - have you encountered this. Am I over looking something. I've checked the idle tables and transferred the map from v5.10 over to .7
Logic, Tephra, JO, fostyTou - any idea whats going one here?
https://www.evolutionm.net/forums/ec...-searched.html
https://www.evolutionm.net/forums/ec...ched-roms.html <-- if you are only running SD!
That should help you out!
#1250
These should solve your stall issue.
#1251
#1252
#1253
#1254
-Will
#1257
There was just another thread on what style of switch the car uses stock. Combine that with your DSM/3g clutch-to-start switch (disconnect it, I hate starting with the clutch anyway) with the appropriate signal and output and you should be all good!
#1258
Yeah, I fixed the post, it got all messed up with spaces and stuff...should be good now.
The changes that were made were the following:
BOTH SD AND MAF:
Added the following XML and changed the bit to 0, per mrfred.
Changed Periphery2 (FCA) bit 15 to 0 (last bit) to disable EGR completely and codes.
JUST SD:
Changed these tables to fix the throttle hang on decel issue, top is stock, bottom is zeroed out:
The changes that were made were the following:
BOTH SD AND MAF:
Added the following XML and changed the bit to 0, per mrfred.
Code:
<table name="EGR System Enable/Disable" category="Other ECU Options" address="103d" type="1D" level="2" scaling="uint8"/>
JUST SD:
Changed these tables to fix the throttle hang on decel issue, top is stock, bottom is zeroed out:
Last edited by phenem; Dec 19, 2009 at 12:33 PM.