TephraMod V7
#1261
Heres the xml I found.
Code:
<table name="Decel Fuel Cut Delay - Neutral A/C Off" category="Fuel" address="42bc" type="2D" level="2" scaling="uint8"> <table name="Load" address="675e" type="Y Axis" elements="7" scaling="Load"/> </table> <table name="Decel Fuel Cut Delay - In Gear A/C Off" category="Fuel" address="42ca" type="2D" level="2" scaling="uint8"> <table name="Load" address="675e" type="Y Axis" elements="7" scaling="Load"/> </table> <table name="Decel Fuel Cut Delay - Neutral A/C On" category="Fuel" address="42d8" type="2D" level="2" scaling="uint8"> <table name="Load" address="675e" type="Y Axis" elements="7" scaling="Load"/> </table> <table name="Decel Fuel Cut Delay - In Gear A/C On" category="Fuel" address="42e6" type="2D" level="2" scaling="uint8"> <table name="Load" address="675e" type="Y Axis" elements="7" scaling="Load"/> </table>
#1262
Applauldd, do you have the decel xml for 964200011? I dont have it so I couldn't compare it. I thought I found it but it doesnt look right when I open the table.
Heres the xml I found.
Heres the xml I found.
Code:
<table name="Decel Fuel Cut Delay - Neutral A/C Off" category="Fuel" address="42bc" type="2D" level="2" scaling="uint8"> <table name="Load" address="675e" type="Y Axis" elements="7" scaling="Load"/> </table> <table name="Decel Fuel Cut Delay - In Gear A/C Off" category="Fuel" address="42ca" type="2D" level="2" scaling="uint8"> <table name="Load" address="675e" type="Y Axis" elements="7" scaling="Load"/> </table> <table name="Decel Fuel Cut Delay - Neutral A/C On" category="Fuel" address="42d8" type="2D" level="2" scaling="uint8"> <table name="Load" address="675e" type="Y Axis" elements="7" scaling="Load"/> </table> <table name="Decel Fuel Cut Delay - In Gear A/C On" category="Fuel" address="42e6" type="2D" level="2" scaling="uint8"> <table name="Load" address="675e" type="Y Axis" elements="7" scaling="Load"/> </table>
Last edited by Evo_Jay; Dec 21, 2009 at 05:48 PM.
#1264
#1266
C:\Program Files\OpenECU\EcuFlash\rommetadata\mitsubishi\evo\
It should be something similar to this. Open the file that corresponds to your hex file(8858xxxxxx) with notepad and copy/paste in the xml at the end before </rom>.
#1267
yeah thats how u normally do it, but with the V7 rom its all bogus??
#1268
i have been unable to edit anything to this rom as well... Then I noticed I couldnt edit any rom, w/ any .xml I had... What a huge clusterfk that was... But in the end the fix was easy, as the "path" that ecuflash was looking thru (listed on right hand side once u pull up a rom), had changed... So check that!
I ended up searching thru the comp. to locate any random files (had a few), and deleted them (and pretty sure I actually got them all this time) as it took much longer to install... then reinstalled a fresh version, and have been reediting the stock .xml from scratch. :P
I think Im gonna wait for JOT to finish up w/ the .xmls for the IX rom, before I try
v7 again.
I ended up searching thru the comp. to locate any random files (had a few), and deleted them (and pretty sure I actually got them all this time) as it took much longer to install... then reinstalled a fresh version, and have been reediting the stock .xml from scratch. :P
I think Im gonna wait for JOT to finish up w/ the .xmls for the IX rom, before I try
v7 again.
#1270
#1271
#1273
Yeah, I fixed the post, it got all messed up with spaces and stuff...should be good now.
The changes that were made were the following:
BOTH SD AND MAF:
Added the following XML and changed the bit to 0, per mrfred.
Changed Periphery2 (FCA) bit 15 to 0 (last bit) to disable EGR completely and codes.
JUST SD:
Changed these tables to fix the throttle hang on decel issue, top is stock, bottom is zeroed out:
The changes that were made were the following:
BOTH SD AND MAF:
Added the following XML and changed the bit to 0, per mrfred.
Code:
<table name="EGR System Enable/Disable" category="Other ECU Options" address="103d" type="1D" level="2" scaling="uint8"/>
JUST SD:
Changed these tables to fix the throttle hang on decel issue, top is stock, bottom is zeroed out:
i have been unable to edit anything to this rom as well... Then I noticed I couldnt edit any rom, w/ any .xml I had... What a huge clusterfk that was... But in the end the fix was easy, as the "path" that ecuflash was looking thru (listed on right hand side once u pull up a rom), had changed... So check that!
I ended up searching thru the comp. to locate any random files (had a few), and deleted them (and pretty sure I actually got them all this time) as it took much longer to install... then reinstalled a fresh version, and have been reediting the stock .xml from scratch. :P
I think Im gonna wait for JOT to finish up w/ the .xmls for the IX rom, before I try
v7 again.
I ended up searching thru the comp. to locate any random files (had a few), and deleted them (and pretty sure I actually got them all this time) as it took much longer to install... then reinstalled a fresh version, and have been reediting the stock .xml from scratch. :P
I think Im gonna wait for JOT to finish up w/ the .xmls for the IX rom, before I try
v7 again.
#1274
You don't want/need to change the periphery for this ROM. Really, it disables something else and the code for the EGR stuff isn't even in the VIII rom! If you really really want to make sure it is disabled use the other bit that mrfred posted and leave the periphery alone!
So I changed Periphery2 (FCA) bit 15 to 0 (last bit) to disable EGR completely and codes. If I don't do that it throws a check engine light?
I just wanted to fix that so others that run the 9653 ROM when they change mrfred's bit they would get check engine lights as well. I updated my ROM to reflect both changes, I just wanted to let others know of the update so they didn't have to re-download and transfer all the tables over again.