crewdawg130

iTrader: (16)

P0603 Internal Control Module Keep Alive Memory (KAM) Error

Im getting this code after someone flashed the wrong rom in a car with out saving the original, so i had to disable the immobilizer on the periphery (FAA) bit 3, so he can start the car. Any idea what we can do to turn off this code. And yes ive tried. As soon as you clear it, it pops back on.

Thanks much for your help

MR Turco

iTrader: (16)

I think it is actually bit 2, not three. It is the third bit but the list starts with 0.

crewdawg130

iTrader: (16)

ok. ill try today..... thanks

MR Turco

iTrader: (16)

dont forget to set bit 3 back to 1.

TTP Engineering

iTrader: (465)

I experienced this back in 2006 while using a 2005 ROM in a 2003 ECU with ECUTEK after a COP ignition system burned the traces on the ECU.

Babi@Force-Fed

is the same ecu tho.... and bit 2 is already 0

Babi@Force-Fed

It has to be bit 3 on FAA. Bit 2 wont crank the car.

todd6027

iTrader: (10)

bit3 is correct

crewdawg130

iTrader: (16)

have you had this problem or is it just me?

MR Turco

iTrader: (16)

Sorry, my periphery table says Bit 2. It could be wrong.

todd6027

iTrader: (10)

Its definitely bit 3

todd6027

iTrader: (10)

had a similar prob with an evo8 some time ago, try leave immo switched on in bit3 and change immo code to FFFF , enter as 0xffff .

crewdawg130

iTrader: (16)

0xfff.....rodger... ill try.. thanks much