How are u guys launching with V7 launch map
Trending Topics
#8
Whats ur TPS setting..
we are playing around with it....
we have it building about 18 psi from the gates, which we want a little lower. Then we are running to an issue with a bit too much fuel during launch causing us to bog. Haven't quite dialed it in yet, but we are pretty darn close.
we have it building about 18 psi from the gates, which we want a little lower. Then we are running to an issue with a bit too much fuel during launch causing us to bog. Haven't quite dialed it in yet, but we are pretty darn close.
#9
Evolved Member
once my clutch goes back in ima mess around with it i built 15psi on my 16g im aiming to make the transition on2 the regular map as smooooooth as possible. i think that will b the key for non boggy-ness
#10
Account Disabled
iTrader: (38)
That is one of the things we are playing with... using TPS to achieve a lower boost setting as well as reducing the amount of fuel during launch.
The transition is the most difficult part, but what we are trying to dial in is the shift.... I'm trying to make it so we are on the launch map thru 1st gear and when the shift to 2nd comes up its in the transition phase.
The transition is the most difficult part, but what we are trying to dial in is the shift.... I'm trying to make it so we are on the launch map thru 1st gear and when the shift to 2nd comes up its in the transition phase.
#11
Evolved Member
iTrader: (171)
Join Date: Apr 2005
Location: Chandler, AZ
Posts: 1,216
Likes: 0
Received 0 Likes
on
0 Posts
I was using the V7 launch map on the red and was building up 16psi at 5750 rpm. I had awesome launches!
now, i changed to the SD V7 map, and every time i let the clutch out to launch, the engine will just die. it will take a few seconds to start back up as if the engine is flooded.
Any idea's on what could be wrong?
now, i changed to the SD V7 map, and every time i let the clutch out to launch, the engine will just die. it will take a few seconds to start back up as if the engine is flooded.
Any idea's on what could be wrong?
#12
Evolving Member
Join Date: Sep 2009
Location: Creston, Iowa
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
I was using the V7 launch map on the red and was building up 16psi at 5750 rpm. I had awesome launches!
now, i changed to the SD V7 map, and every time i let the clutch out to launch, the engine will just die. it will take a few seconds to start back up as if the engine is flooded.
Any idea's on what could be wrong?
now, i changed to the SD V7 map, and every time i let the clutch out to launch, the engine will just die. it will take a few seconds to start back up as if the engine is flooded.
Any idea's on what could be wrong?
#14
Account Disabled
iTrader: (38)
This is what we are experiencing. The car that we are using for the test car is our owners SD VIII. Exact same problem... we have gotten it better... it wont die, but does seem flooded. We have almost got it worked out though. Need a handful more track passes to finalize it.