Carloverx

iTrader: (26)

hey, i'm high jacking your thread for literally 30seconds. Can anyone just jump on Evoscan and tell me what their Eval formula is supposed to be for 2byte load? Thanks in advance.

Ok, back to issues with this rom lol

hediki12

0.3125*x

adcgn45

iTrader: (14)

stft around -12

ltft at 0.1

ive adjusted the biss using evoscan in sas mode and logging with zeitronix to get my rpm. at 850
my mods are;
hks test pipe and ex
rmr dp
rmr upper piping
dejon intake with perrin filter
gfb stealth bov
walbro 255
arp head studs
kelford 272 cams
zeitronix wdb
greddy profec b spec 2

adcgn45

iTrader: (14)

are you sure it isnt supposed to be 31.25?

Boosted Tuning

iTrader: (12)

First, I need the numbers for LTFT low and mid.

Also, if you STFT is at -12, your LTFTs are probably off.

No he is correct.

l2r99gst

iTrader: (2)

I could probably tell you if I had the ROM. Where can I download it?

Or better yet, if you have your MUT table defined in your XML, tell me what the value is in 1C.

Your loads should be as follows (if it follows the same pattern as the other ROMs):

2-byte LOAD_Raw (no temp compensation)
hex value at 1C in MUT table + 0x09
hex value at 1C in MUT table + 0x0A
2-byte LOAD_Temp_Compensated
hex value at 1C in MUT table + 0x0B
hex value at 1C in MUT table + 0x0C
2-byte LOAD_Baro_Compensated
hex value at 1C in MUT table + 0x0D
hex value at 1C in MUT table + 0x0E
2-byte LOAD_Temp_and_Baro_Compensated
hex value at 1C in MUT table + 0x0F
hex value at 1C in MUT table + 0x10

Boosted Tuning

iTrader: (12)

l2r99gst to the rescue.

l2r99gst, that 94960013 ROM is rare and sometimes has been said its not even an Mitsu OEM ROM, so I dont know where you could download it from.

adcgn45

iTrader: (14)

i can send you a copy of the rom if you like lr2? pm me an email
mut 1c is 887a

gsrboi80

iTrader: (38)

Funny works fine in my car among many others Hmmmmmmmmmm

l2r99gst

iTrader: (2)

OK, so try 887a added to the valules I gave above, depending on which 2-byte load you are interested in logging.

If that doesn't work, then I can take a look in IDAPro.

Boosted Tuning

iTrader: (12)

Yeah, some people have success with 9653, while others have idle issues and other lil issues. I just find that I like 9417 better.

adcgn45

iTrader: (14)

wow so many to choose from .which one is the one i should use for basic tuning?

l2r99gst

iTrader: (2)

Fuel will almost always use temp+baro compensated load. Timing will use temp+baro compensated load for IAT < 77F. Above 77F, then baro compensated will be used.

So, basic tuning under most conditions, you should use baro+temp compensated load.

Boosted Tuning

iTrader: (12)

Expect V7 ROM's BIGMAPS.

9653 V7 and 8859 V7 timing and fuel BIGMAPS follow temp+baro compensated load.

But on 9417 V7, fuel and timing BIGMAPS follow 1/2byte load aka raw load.

SoCalRedLine

iTrader: (2)

i suspect the BOV causing issues with rich idle. Ive had the same problem with a lot of VTA BOV's. Most gfb's ive tuned stay partially open at idle and the car goes too rich.