HELP ASAP car wont start plz =((
#1
Newbie
Thread Starter
Join Date: Dec 2010
Location: Kuwait
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
HELP ASAP car wont start plz =((
hello, first of all my car is 2008 lancer EX 1.5L and its using same ECU & OBD2 port as lancer GT or EVO
i tried to read my ECU by using ECUflash & tactrix cable port 2 and it couldnt read it, stupid me i removed the key .... after that all my dash lights become flashin " check service , seat belts .....etc " and car wont start i can hear the engine tryin to start but it wont complete the proccess of starting =////
I took my car to mitsubishi dealer and they said to me we can not cummincate with your car ECU.
you have to change it to new one =((((
today i tried reading the car using EVOscan it could indentify my ECU and name it as EVOX CAN MUTII
and when i click start datelogger it never stops from receiving date .
@ the end i was tryin anythin @ the programme i pressed " CLEAR DTC'S " and it showed me error that
there is no respone from my ECU!!!!
I dont know how to use EVOscan probley or even ecuflash =/
is there a way to solve this problem without buying new ECU?
this is first time error tryin to read car ECUflash =/
[11:22:14.521] -- loading kernel --
[11:22:14.521] -- connecting to kernel --
[11:22:14.521] kernel get version
[11:22:14.677] ECU HW part number : 1860A799
[11:22:14.692] ECU SW part number : 1860A79901
[11:22:14.724] -- unlocking ECU --
[11:22:14.724] starting session...
[11:22:14.724] requesting seed...
[11:22:14.739] sending key...
[11:22:14.973] interface close
[11:22:14.989] interface close
second time same cant read ECUflash......
flashing tool "mitsukernel" loaded.
flashing tool "mitsukernelocp" loaded.
flashing tool "mitsubootloader" loaded.
OpenPort Cable Connected.
3064 byte kernel read.
sending init sequence 1 (0001)
interface close
I checked battery, timing belt , fuel pumps everythin fine ...... i hope u can help guys =((((
i tried to read my ECU by using ECUflash & tactrix cable port 2 and it couldnt read it, stupid me i removed the key .... after that all my dash lights become flashin " check service , seat belts .....etc " and car wont start i can hear the engine tryin to start but it wont complete the proccess of starting =////
I took my car to mitsubishi dealer and they said to me we can not cummincate with your car ECU.
you have to change it to new one =((((
today i tried reading the car using EVOscan it could indentify my ECU and name it as EVOX CAN MUTII
and when i click start datelogger it never stops from receiving date .
@ the end i was tryin anythin @ the programme i pressed " CLEAR DTC'S " and it showed me error that
there is no respone from my ECU!!!!
I dont know how to use EVOscan probley or even ecuflash =/
is there a way to solve this problem without buying new ECU?
this is first time error tryin to read car ECUflash =/
[11:22:14.521] -- loading kernel --
[11:22:14.521] -- connecting to kernel --
[11:22:14.521] kernel get version
[11:22:14.677] ECU HW part number : 1860A799
[11:22:14.692] ECU SW part number : 1860A79901
[11:22:14.724] -- unlocking ECU --
[11:22:14.724] starting session...
[11:22:14.724] requesting seed...
[11:22:14.739] sending key...
[11:22:14.973] interface close
[11:22:14.989] interface close
second time same cant read ECUflash......
flashing tool "mitsukernel" loaded.
flashing tool "mitsukernelocp" loaded.
flashing tool "mitsubootloader" loaded.
OpenPort Cable Connected.
3064 byte kernel read.
sending init sequence 1 (0001)
interface close
I checked battery, timing belt , fuel pumps everythin fine ...... i hope u can help guys =((((
#4
Newbie
Thread Starter
Join Date: Dec 2010
Location: Kuwait
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I agree with razorlab , you need 2 bench the ECU , but i couldnt do it myself.
so i had to go to the dealer and buy new ecu .......
try to do it urself or find someone who knows how .....
let me know how it goes, gl
so i had to go to the dealer and buy new ecu .......
try to do it urself or find someone who knows how .....
let me know how it goes, gl
#5
I would go to a junk yard, Get the harness that connects to the secu and I would reflash it with the stock rom and start over. Run the unlocker, then flash it with which ever ROM you choose, I really like the Tephra V7 ROM, EVO8 ecu in a car that is 11 years older than the ECU itself. lol
#6
Evolving Member
iTrader: (3)
Join Date: May 2008
Location: Utah
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
wow, how much was that new ecu from the dealer?
question, i used to have an Evo x and i had to bench my ecu myself. but now i have an evo 8 and i've never heard of someone bricking their ecu. is it possible on the 8s and 9s?
question, i used to have an Evo x and i had to bench my ecu myself. but now i have an evo 8 and i've never heard of someone bricking their ecu. is it possible on the 8s and 9s?
Thread
Thread Starter
Forum
Replies
Last Post