Tial BOV opens/ stutters while on boost
#16
This table should help you out.
#17
Evolving Member
Thread Starter
Join Date: Jul 2009
Location: MA
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
So, I got me a "-3 PSI" spring appropriately colored bright pink. Works great, seems to hold 25+ PSI and the lift off flutter is now completely gone. Night and day difference in drivability going from the -8 and -10 PSI springs.
Thanks for the tip
Last edited by 95630706; Dec 17, 2010 at 09:12 AM.
#18
Evolving Member
Thread Starter
Join Date: Jul 2009
Location: MA
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
deej1, I am not completely sure what this table does. I could not find a description in Merlin's guide. I did however try your values (my default was straight 100's). Combined with judicial WGDC settings and lowering the WGDC 100% below "X" load the "surge" is now gone. pulls nicely through the gears.
So combination of softer BOV spring and a less aggressive boost profile and this little HKS turbo is a blast! Thanks for the help.
So combination of softer BOV spring and a less aggressive boost profile and this little HKS turbo is a blast! Thanks for the help.
Last edited by 95630706; Dec 18, 2010 at 08:15 AM.
#19
Evolved Member
iTrader: (9)
I guess I'm ordering a lower 6 psi rated spring to see if I can make the car livable again!
Thread
Thread Starter
Forum
Replies
Last Post
evl gsr
Evo Engine / Turbo / Drivetrain
1
Apr 20, 2016 02:30 AM