issues with my ecuflash...
#1
issues with my ecuflash...
wats up everyone.. so i went today to try to upload my map from my ecu.. and it didnt up load.. a column came up with blank areas.. now my battey died a week ago and i recharged it.. but not sure if it is low again.. i have a small battery in it.. i have no idea y its acting up.. never delt with this issue before..
here is the pic of wat came up..
here is the pic of wat came up..
#3
Try and let the car idle for about 5-10 mkns and try again, my car had a similar issue and it's bcuz the battery was low, once you hook up, engage Ecuflash and upload rom file and Ecuflash will automaticlly turn you engine off. It worked for me and that came from a reputable shop as well
#6
Evolved Member
Looks like the read_evo xml is in a different folder to the one you have specified in the amls folder options. The read xmls are in a read templates folder which is usually in C:\Program Files \OpenECU\EcuFlash\rommetadata or C:\Program Files (x86)\OpenECU\EcuFlash\rommetadata for Win 7. You need that folder and it's contents copied to the path for the rest of your xmls.
Trending Topics
#8
Evolved Member
iTrader: (2)
Join Date: Mar 2003
Location: Santa Cruz
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
If you screw up too bad, you can try to re-install ecuflash. that will restore all the XML files to their original state. If you have modified any of the XML files, you can copy the modified files on top of the fresh re-installed ecuflash to restore the settings for your car.
#11
Wow, I havent seen this before, this might sound stupid but what did you do last in Ecuflash that you might have changed since the last time you ran it, or is this the first time you've used it?? (No pun intended)
#12
I might be wrong but it might have died on you or you made it a brick,
Do you have an OBD2 auto scanner too hook it up too just to attempt to reach the ecu and see if it is responding correctly,
Are your previous rom files saved as hex files or XML
Do you have an OBD2 auto scanner too hook it up too just to attempt to reach the ecu and see if it is responding correctly,
Are your previous rom files saved as hex files or XML
Last edited by blacksunset; Mar 16, 2011 at 01:39 AM.
#13
everything was working fine.. i honestly have no idea wats goin.. i did the obd patch on my ecuflash and came out fine.. then i tried doin the tephra v7 on it.. and didnt install ok.. so i deleted everything.. and reinstalled it again... and the i tried to upload my ecu and nothing.. i have no clue wats goin on..